Audio Technica AT-LPW30TK Turntable

£259.00

£215.83 Exc. VAT |

Description
Specifications
Customer Reviews (0)

Audio Technica AT-LPW30TK Turntable

The AT-LPW30TK is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated teak veneer to limit low-frequency acoustical feedback.

The turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW30TK is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

features:

Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
Fully manual operation
Adjustable dynamic anti-skate control
Professional anti-resonance, die-cast aluminum platter with rubber mat
AT-HS4 universal ½"-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
Straight tonearm with hydraulically damped lift control and lockable rest
Anti-resonance MDF (medium density fiberboard) plinth with teak simulated wood veneer
Built-in switchable phono pre-amplifier for phono or line-level output
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Type	Belt-drive manual turntable
Motor	DC servo
Drive Method	Belt drive
Speeds	33-1/3 RPM, 45 RPM
Turntable Platter	Die-cast aluminum
Wow and Flutter	< 0.15% WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio	>60dB
Output Level	Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain	35 dB nominal, RIAA equalized
Power Supply Requirements	100-240V AC, 50/60 Hz, 0.5 A Max.
Power Consumption	110 V 60 Hz Working: 1.1 W Motor off: 1.0 W Power off: 0.1 W
Dimensions	420.0 mm (16.53") W x 340.0 mm (13.38") D x 116.9 mm (4.6") H
Weight	3.90 kg (8.60 lbs.) without dust cover
Accessories Included	Dust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95C stereo cartridge, 45-RPM adapter, RCA audio cable (approx.. 1.0 m (3.3’)), AC adapter (approx. 1.5 m (4.9’)) (AD-SA1205WE), Dust cover hinges

Tonearm type: Static balanced straight aluminum pipe tonearm
Effective arm length: 223.6 mm
Overhang: 18.6 mm
Tracking error angle: <2 degrees
Applicable cartridge weight: 12-17 g
Stylus pressure adjustment range: 0-3 g
AC adapter: 12 V, 0.5 A
Replacement Stylus: AT-VMN95C

Be the first to Write a Review for this item!