Manufacturer
Audio Technica AT-LPW30 Turntable
Zoom  Zoom
Audio Technica AT-LPW30 TurntableAudio Technica AT-LPW30 TurntableAudio Technica AT-LPW30 Turntable

Audio Technica AT-LPW30 Turntable

$364.89    
$304.07 Exc. VAT |  |
  

 

Audio Technica AT-LPW30TK Turntable

The AT-LPW30TK is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated teak veneer to limit low-frequency acoustical feedback.
 
The turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.
 
The AT-LPW30TK is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

features:

  • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
  • Fully manual operation
  • Adjustable dynamic anti-skate control
  • Professional anti-resonance, die-cast aluminum platter with rubber mat
  • AT-HS4 universal ½"-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
  • AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
  • Straight tonearm with hydraulically damped lift control and lockable rest
  • Anti-resonance MDF (medium density fiberboard) plinth with teak simulated wood veneer
  • Built-in switchable phono pre-amplifier for phono or line-level output
  • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
  • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

 

Type Belt-drive manual turntable
Motor DC servo
Drive Method Belt drive
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Die-cast aluminum
Wow and Flutter < 0.15% WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio >60dB
Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain 35 dB nominal, RIAA equalized
Power Supply Requirements 100-240V AC, 50/60 Hz, 0.5 A Max.
Power Consumption 110 V 60 Hz
Working: 1.1 W
Motor off: 1.0 W
Power off: 0.1 W
Dimensions 420.0 mm (16.53") W x 340.0 mm (13.38") D x 116.9 mm (4.6") H
Weight 3.90 kg (8.60 lbs.) without dust cover
Accessories Included Dust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95C stereo cartridge, 45-RPM adapter, RCA audio cable (approx.. 1.0 m (3.3’)), AC adapter (approx. 1.5 m (4.9’)) (AD-SA1205WE), Dust cover hinges


Tonearm type: Static balanced straight aluminum pipe tonearm
Effective arm length: 223.6 mm
Overhang: 18.6 mm
Tracking error angle: <2 degrees
Applicable cartridge weight: 12-17 g
Stylus pressure adjustment range: 0-3 g
AC adapter: 12 V, 0.5 A
Replacement Stylus: AT-VMN95C

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: $0.00    View Basket 
Analogue Seduction