Manufacturer
Fyne Audio F1-5 Loudspeakers
Zoom  Zoom
Fyne Audio F1-5 LoudspeakersFyne Audio F1-5 LoudspeakersFyne Audio F1-5 Loudspeakers

Fyne Audio F1-5 Loudspeakers

Please note we can only supply Fyne Audio products to the UK

£3,999.00    
£3,332.50 Exc. VAT |  |
  

Not available for online order. Please contact us to purchase.

Fyne Audio F1-5 Loudspeakers

The F1-5 takes the same technology as the larger F1-8 sibling, distilling it into a neat bookshelf design. The hand crafted cabinet is supported on compact machined aluminium plinth that houses Fyne’s state of the art BassTrax LF diffuser. Surrounded by FyneFlute rubber surround, the F1-5 features a 125mm IsoFlare low frequency driver mated to a 19mm magnesium dome compression tweeter to create a point source, time aligned transducer delivering pure isotropic radiation across the entire audio spectrum. Hand finished with care at Fyne Audio’s UK manufacturing facility in stunning real walnut veneer with burr walnut inlay, the F1-5 is the pinnacle of UK loudspeaker design distilled into a sumptuous compact bookshelf design.
 
Crafted to partner the finest amplification, the F1-5 is a compact 321mm tall yet offers 87dB/W efficiency, bass output to below 50Hz and substantial 200W peak power handling. The 470mm tall F1-8 reaches down to a “floorstanding” 33Hz in-room, is 91dB/W efficient to make the most of the low power valve amplification and can handle up to 360W peak power.
 
Both new F1 Series models offer the scale and depth of floorstanding designs with finesse and tautness in monitor format, thanks to rigid birch ply cabinets and the integration of Fyne’s BassTrax technology.
 
Incorporated into the machined aluminium plinths of the F1-5 and F1-8, BassTrax uses a Tractrix profile diffuser cone that transfers the plane wave LF energy from the cabinet’s down-firing port into a 360 degree spherical wave front. This seamless LF output delivers substantial bass depth and weight despite the smaller volume cabinets and makes the resulting speaker far less critical of room position and placement.
 
True to the F1 Series, both new stand mount models offer subtle control over the presence band output via a robust front mounted aluminium knob. This unique control through the 2.5kHz-5kHz region, of up to +/-3dB, gives users subtle adjustment of the soundstage through the key vocal spectrum without impacting the overall balance or the speaker’s faithful reproduction of the original recording. The control can gently counter room issues such as being overly live or too heavily damped or can be left in the central 0dB position for a purist response in natural sounding rooms.
 
To support these new stand mount models, Fyne Audio has also announced the dedicated FS8 loudspeaker stands, created for F1-5 and F1-8 but equally at home with the new F700 and F701 models. The design shares the same luxury build and machined aluminium plinth of the F1 and F700 models, adding both acoustic benefits and aesthetic cohesion to these stand mount designs.
 
 
System Type 2 way, downwards firing port, with BassTrax Tractrix diffuser*
Recommended amplifier power (Watt RMS) 30 - 100
Peak power handling (Watt) 200
Continuous power handling (Watt RMS) 50
Sensitivity (2.83 Volt @ 1m) 87dB
Nominal impedance 8 Ohm
Frequency response (-6dB typical in room) 48Hz - 38kHz
Drive unit complement 1 x 125mm IsoFlare point source driver, multi-fibre bass/ midrange cone, FyneFlute surround with 19mm magnesium dome compression tweeter, neodymium magnet system
Crossover frequency 1.9kHz
Crossover type Single wired passive low loss, 2nd order low pass, 1st order high pass. Deep Cryogenically Treated
System adjustments Presence (2.5kHz - 5.0kHz) +/- 3dB
Dimensions - HxWxD 321 x 186 x 289mm (12.6 x 7.3 x 11.4”)
Weight - Each 5.7kg (12.6lbs)
Finishes Piano Gloss Walnut

Be the first to Write a Review for this item!

Related Products
Fyne Audio FS8 Speaker Stands
01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket 
Analogue Seduction