Emotiva XPA HC-1 Monoblock Power Amplifier
Zoom  Zoom
 Emotiva XPA HC-1 Monoblock Power AmplifierEmotiva XPA HC-1 Monoblock Power Amplifier 

Emotiva XPA HC-1 Monoblock Power Amplifier

£874.17 Exc. VAT |  |

Emotiva XPA HC-1 Monoblock Power Amplifier
Priced per single amplifier

The XPA HC-1 is a true monoblock power amplifier featuring a single high-power XPAGen3 amplifier module, powered by its own dedicated Switch Mode Power Supply (SMPS). The chassis is the same height and depth as other XPA Gen3 models, but half as wide, making it easy to position the HC-1 near each of your main speakers or arrange several of them side-by-side in your equipment rack. Emotiva has kept the sides clear of ventilation slots, so there’s no problem setting them directly next to each other. If you’re looking for a single amplifier to power your centre channel, a pair of monoblocks to power your main speakers, or a full set to power a surround sound system, then the XPA HC-1 is probably the perfect amplifier for you.


Power output: 300 watts RMS into 8 ohms | 600 watts into 4 ohms
Audiophile quality Class A/B output stage with optimised Class H switch-mode power supply
Regulated switch-mode power supply combines massive power capability, high reliability, excellent performance, and reduced weight
Balanced and unbalanced inputs for compatibility with a wide variety of preamps and surround sound processors
Comprehensive yet transparent protection circuitry protects from most common fault conditions without degrading sound quality.
Dimensions (cm): 21.3 W x 48.3 D x 19.4 H (including feet)
Weight (unboxed) kg: 9.75
Power Requirements: 100 – 250 VAC 50/60 Hz (automatically detected)

- Number of channels: 1
- Power (@0.1%): 1k/600 W RMS (4/8O)
- Bandwidth: 20Hz – kHz +/-0.07dB
- Minimum Load: 4 ohms

- Freq response: 10-80k Hz (0/-1dB)
- THD+Noise: <0.01%
- SNR: 89/117dB (1w/rated power)
- Damping Factor: >500 at 8 ohms
- Gain: 29dB
- Impedance: 33/23.5KO (Bal/Unbal)

- In: 1 Unbal (RCA); 1 bal (XLR)
- Speaker Out: 5-way binding posts
- Trigger Input: 5 – 12 V (AC or DC)
- Current: <10 mA input required
- Trigger Out: 12 VDC; any load <120mA

- Transformer: 1200VA toroidal
- Capacitance: 120,000uF filter
- Supply: 115-230VAC +/-10% @50/60Hz

- Dimensions: 17" x 7.75" x 19"
- Weight: 33.1Kg (73lbs)

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket 
Analogue Seduction