Technics SU-C700 Stereo Integrated Amplifier
Zoom  Zoom
Technics SU-C700 Stereo Integrated AmplifierTechnics SU-C700 Stereo Integrated AmplifierTechnics SU-C700 Stereo Integrated Amplifier
Technics SU-C700 Stereo Integrated AmplifierTechnics SU-C700 Stereo Integrated Amplifier

Technics SU-C700 Stereo Integrated Amplifier

£1,040.83 Exc. VAT |  |

Technics SU-C700 Stereo Integrated Amplifier

Employs innovative fully-digitised processing that delivers a pure and accurate signal to the speakers.

"Playing Fleetwood Mac's The Dance live set, the Technics manages to deliver a sound with plenty of impact and drive, the performers deliver with fine clarity against the 'live' ambience."

JENO Engine (Jitter Elimination and Noise-shaping Optimization)

Just like the R1, the SU-C700 is a fully-digital amplifier and delivers high-resolution digital signals without any distortion being introduced between the input stage and output to the speakers. Technics has developed an original jitter-reduction circuit, avoiding the sound quality degradation due to jitter common to conventional digital amps. It uses a clock generator for the noise-shaping system to reduce jitter in the low-frequency range and a high-precision sample rate converter to suppress jitter in the high-frequency range.

LAPC (Load Adaptive Phase Calibration)

Technics has developed a speaker impedance optimisation algorithm, using digital signal processing to flatten both the amplitude and phase-frequency response to make the most of your speakers. The result is a sound with better focus, spaciousness and definition.

High-speed Silent Linear Power Supply

Using a large-current Schottky-barrier diode, a rectifier circuit with electrolytic capacitors, and a stabilised power supply circuit, the SU-C700 ensures ample power supply at all times, even when dynamic music demands high current.

Battery Driven Clock Generator

Technics used battery power for low-noise applications in analogue amplifiers in the past: here, this same technology is used to improve digital clock precision, enhancing the definition of the sound.

Various Inputs

The SU-C700 supports a wide range of inputs, such as SPDIF, Analogue and Phono, as well as USB-DAC for connection of a PC. The digital input terminal supports coaxial 192-kHz/24-bit PCM and optical 96-kHz/24-bit. The USB DAC input terminal supports 192-kHz 32-bit PCM and 2.8-MHz/5.6-MHz DSD native playback (analogue output) and asynchronous transmission. The SU-C700 converts analogue signals to high-precision 192-kHz/24-bit PCM signals using the A/D converter. The full-digital system achieves high-purity reproduction from any content.
Accurate Digital Technology
JENO Engine
(Jitter Elimination and Noise-shaping Optimization)
Load Adaptive Phase Calibration
High-speed Silent Linear power supply
Battery Driven Clock Generator
High Rigidity Metal Double Chassis
Remote Control, AC Cord, Operating Instructions
Approx. 8.3 kg
Dimensions (W x H x D)
340 x 132 x 325 mm
Power Consumption
73 W
Power Supply
AC220-240 V, 50 Hz/60 Hz
System Port
System Control Input/Output (Φ3.5 mm Jack)
Headphone Output
USB Audio Class Specification
USB Audio Class 2.0, Asynchronous Mode
Support Codec
DSCYes (2.8224 MHz, 5.6448 MHz)
PCMYes (32, 44.1, 48, 88.2, 96, 176.4, 192 kHz / 16, 24, 32 bit)
Digital Input Terminal
Coaxial Digital x 3, Optical Digital, USB-B
Analogue Input Terminal
LINE x 1, PHONO(MM) x 1
Load Impedance
4-16 Ω
Frequency Response
LINE 20 Hz - 80 kHz (-3 dB, 8 Ω), PHONO(MM)
20 Hz - 20 kHz (RIAA DEVIATION ±1 dB, 8 Ω),
COAXIAL1/2/3, 20 Hz - 90 kHz (- 3 dB, 8 Ω)
Input Sensitivity / Input Impedance
LINE 200 mV / 22 kΩ, PHONO (MM) 2.5 mV/47 kΩ
Output Power
45 W + 45 W (1 kHz, T.H.D. 0.3%, 8 Ω, 20 kHz LPF)
70 W + 70 W (1 kHz, T.H.D. 0.5%, 4 Ω, 20 kHz LPF)
Technics Definitive Design
High Rigidity Aluminium Cabinet
White LED Illuminated Large Level Meter
Symmetric Structure

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket 
Analogue Seduction