Manufacturer
Emotiva BasX A2m Integrated Amplifier
Zoom  Zoom
Emotiva BasX A2m Integrated AmplifierEmotiva BasX A2m Integrated AmplifierEmotiva BasX A2m Integrated Amplifier

Emotiva BasX A2m Integrated Amplifier

£419.00    
£349.17 Exc. VAT |  |

Emotiva BasX A2m Integrated Amplifier

The Emotiva BasX A2m Integrated Amplifier is a small but perfectly formed two channel amplifier that offers a fantastic specification without breaking the bank.
 
Quality Above All Else
 
Emotiva has gone back to the drawing board with the A2m, with the premise of making a quality sounding amplifier above everything else and it shows with the low noise, wide bandwidth design that combined with a highly optimised input stage that allows high definition sound to truly shine bright in your setup.
 
Built To Last
 
The mantra of built to last resonates with Emotiva and in the A2m, every single part has been tested to meet Emotiva’s exacting standards. A heavy steel chassis is complimented by an aluminium faceplate which will last as well as a double sided circuit board that with plated through holes ensures that sound and signal is optimised.
 
It’s Flexible Too
 
The BasX A2m is not just a one trick pony, it has flexibility built in to accommodate various input and output styles too, with an unbalanced RCA handling your inputs that can be controlled and truly dialled into your setup. Output is handled by a 5-way binding post that can handle bare wire, lugs or your banana plug options, making the A2m truly versatile in your home setup.
 
 

Circuit Topology

  • The BasX A-150 is a two channel power amplifier. The BasX A-150 combines classical audiophile amplifier architecture, based on a heavy-duty linear power supply, and a carefully designed high current short signal path Class A/B output stage, with advanced microprocessor-controlled monitoring and protection circuitry, to deliver superb sound quality at a truly reasonable price.

Audio Specifications

  • Power Output (both channels driven):
    75 watts RMS per channel; 20 Hz – 20 kHz; THD < 0.1%; into 8 Ohms.
    150 watts RMS per channel; 1 kHz; THD < 1%; into 4 Ohms.

  • Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.07 dB)

  • Broad Band Frequency Response: 5 Hz to 80 kHz +0/-1.8 dB

  • THD + noise: < 0.02% (A-weighted); ref rated power

  • Signal to Noise Ratio (8 Ohm load):
    > 120 dB; ref rated power; (A-weighted).
    > 100 dB; ref 1 watt; (A-weighted).

  • Minimum Recommended Load Impedance (per channel): 4 Ohms
    (which equals one 4 Ohm load or two paralleled 8 Ohm loads).

  • Damping Factor (8 Ohm load): > 500.

  • Input Sensitivity (for rated power; 8 Ohm load): 1.2 V.

  • Gain: 29 dB.

  • Input Impedance: 27 kOhms.
     

Input And Output Connections

  • Input Connections: Unbalanced (RCA); one each per channel.

  • Speaker Output Connections: Audiophile grade 5-way binding posts.

  • Trigger:
    Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.
    Trigger Output: 12 VDC; can drive any load up to 120 mA.

Power Requirements

  • 115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected).

Front Panel Controls and Indicators

  • Standby: push button (halo ring changes color to indicate Standby or On).

  • Status LEDs: one per channel; blue.
    Status LEDs change to red to indicate a fault condition.

Rear Panel Controls

  • AC Power switch: rocker switch (switches AC main power).

  • Status LEDs switch: disables front panel Status LEDs.

Protection

  • The BasX A-150 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.

Mechanical

  • Dimensions:
    17” wide x 3-1/8” high x 13-1/2” deep (not including connectors).
    21-1/2” wide x 7” high x 21-1/4” deep (boxed).

  • Weight:
    15.5 lbs (unboxed)
    21.9 lbs (boxed)

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket 
Analogue Seduction