Vivid Audio Oval C1s Centre Speaker
Zoom  Zoom
Vivid Audio Oval C1s Centre SpeakerVivid Audio Oval C1s Centre SpeakerVivid Audio Oval C1s Centre SpeakerVivid Audio Oval C1s Centre Speaker

Vivid Audio Oval C1s Centre Speaker

£5,000.00 Exc. VAT |  


Vivid Audio Oval C1 Centre Speaker

Vivid audio products have been designed with home theatre applications in mind from the start and the C1 is our answer to the crucial centre channel application.

Featuring Vivid Audio's patented driver technology and unique cast carbon fibre  loaded polyester enclosures, the C1 centre speaker simply delivers unrivalled pitch perfect vocal presence to  the most demanding high-end home cinema setup.

C1 is a three-way system employing a single D50 mid range driver, between 900Hz and 4 kHz with the range beyond being handled by a D26 tweeter. Below 900Hz the C1 uses two C125 midbass drivers (patented), mounted on either side of the central mid and high domes. The two drivers are identically driven in order to preserve a symmetrical horizontal polar pattern at all frequencies.

Fourth order filters ensure phase coherence through both crossover points resulting in a seamless response. Optionally, the C1 may be mounted on its matched stand. Made from the same carbon fibre loaded polyester compound as the enclosure, it provides an exceptionally stable footing while holding the loudspeaker at a gentle angle to suit most floor mounted situations. To further guarantee the stability of the complete system, a total of five custom spikes are mounted around the periphery of the base.

Precision machined and gold plated binding posts are recessed into the rear of the cabinet and linked internally to the crossover boards using Van den Hul® cable throughout.

Every Vivid Audio loudspeaker cabinet is hand finished using an elaborate process to ensure the very best aesthetics and finish quality.

Vivid loudspeakers come in two standard colours: pearl white and piano black. But our range of possible colours is actually limited only by your imagination. In keeping with such an individual and unique speaker, we also offer a special service that can match any colour you specify...


Configuration: 3 way vented cabinet
Cabinet material: Complex loaded carbon fibre filled polymer
HF – D26 – 26mm metal dome unit with Tapered Tube loading
MID – D50 – 50mm metal dome unit with Tapered Tube loading
LF – C125 – 2 x 158mm metal coned units
First D26 Break Up mode: 44’000 Hz
Sensitivity: 90dB@ 2.83Vrms and 1.0 meter on axis
Nominal Impedance (Ohm ): 8
Frequency range – 6dB points: 43 – 36,000 Hz
Frequency response: 49 – 33,000 Hz +/- 2dB on reference axis
Harmonic distortion (2nd and 3rd): < .0.5% over frequency range
Cross over frequencies (Hz): 100, 900, 4000
Power handling (music program) watts rms: 300
Loudspeaker dimensions (H, W, D cabinet, D base) mm: 268, 755, 330
Net weight (kg): 23
Shipping dimensions (H, W, D) mm: 370, 945, 450
Shipping mass (kg): 35

Material: Complex loaded carbon fibre filled polymer
Dimensions (H, W, D): 350, 448, 292
Net weight (kg): 13
Shipping dimensions (H, W, D) mm: 440, 535, 380
Shipping mass (kg): 20

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket 
Analogue Seduction