Manufacturer
Michell Engineering Arm plate De-coupling Kit (SME fitting)
Zoom  Zoom

Michell Engineering Arm plate De-coupling Kit (SME fitting)

  (3 Reviews)
£37.00    
£30.83 Exc. VAT |  |

Please note that our Michell Engineering products are available to the UK only.

Michell Engineering Arm De-coupling Kit (SME fitting)

  • FOR SME TYPE ARM MOUNTINGS

This is the latest upgrade kit from Michell Engineering. This De-coupling kit can be installed on all GyroDec and Orbe turntable variants to mechanically de-couple the tonearm and mounting plate from the rest of the turntable, thereby preventing ambient noise from transfering from the turntable to the tonearm/cartridge.

Unlike the originally supplied armboard mounting which is via solid standoffs and through-bolts, the new standoffs have a threaded stud protruding from one end and a threaded hole on the other. The end with the threaded hole also has a nitrile rubber isolating o-ring embedded in its top surface.

To install, the studded ends screw directly into the metal chassis of the turntable, then the armboard is placed on top of the standoffs. Next 3 short Allen head bolts are screwed into the standoffs, holding the underside of the armboard against the o-rings. A grounding strap is then attached to maintain the anti-static grounding of the chassis. Instructions are included. A self-adhesive tonearm cable fixing device is also included to allow correct dressing of the arm cable.

The most noticeable change is an improvement to the fine texture and nuances on both vocals and music and more accurate timbre on wood and string instruments. This is an inexpensive upgrade considering the sound improvement and ease of installation. 

 

 

 

 

Average Rating (3 Reviews):  
Write a Review and share your opinions!

Rating:  
Essential piece of kit
24 June 2023  | 

I purchased an SME arm board for my Michell Gyrodec only to find that all the spacers, bolts, etc, that were used for the incumbent Rega board were too long for the thinner SME arm board. This kit was just what I needed. Perfect.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Essential piece of kit
24 June 2023  | 

I purchased an SME arm board for my Michell Gyrodec only to find that all the spacers, bolts, etc, that were used for the incumbent Rega board were too long for the thinner SME arm board. This kit was just what I needed. Perfect.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Michell Arm Decoupling
07 November 2016  | 

Very good upgrade for a reasonable price. The shipping has been very fast.

Was this helpful to you?  Yes  /  No

7 of 7 people found this review helpful.

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket 
Analogue Seduction