Manufacturer
Browse Shop
VPI  Tonearm Anti-Skate Upgrade for Fatboy Tonearms
Zoom  Zoom

VPI Tonearm Anti-Skate Upgrade for Fatboy Tonearms

£149.99    
£124.99 Exc. VAT |  |
  

VPI Tonearm Anti-Skate Upgrade for Fatboy Tonearms

  • For Fatboy Tonearms only.

Anti-Skate is one of the least understood forces acting on a tonearm. Skating force is created by friction between the stylus and the record, causing a force vector in a direction towards the centre of the record when the headshell of the tonearm has an offset angle. Putting the stylus down on a flat, grooveless record will cause the arm to move toward the centre of the record. 

Arm manufacturers have tried to compensate for this force, but that is impossible because the force is constantly changing as the music and velocity change.

If you have older VPI turntable/tonearm combo that has "silver" junction box, a new "black" junction box would need to be purchased to use the anti-skate upgrade. 

Directions on how to install:

  • The anti-skate mounts on the black junction box by removing the left front side screw using a #2 Phillips screwdriver and screwing the anti-skate mechanism into the now vacant hole. Tighten the nut once you have the shaft screwed all the way in. 
  • Remove the counterweight and install the black D shaped piece on the counterweight stub

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket