Pro-ject Debut III SE Turntable
Supplied with a pre-fitted Ortofon Super OM10 Cartridge and Dustcover
The ProJect Debut has been an internationally respected and extremely popular domestic turntable since its inception in 1999 and is now in its third re-incarnation
The Project Debut III SE Turntable is set to take all the impressive specifications of the current model, and improve on them even further.
First and foremost, ProJect is highly regarded for their attention to design, and the ProJect Debut SE3 turntable is no exception. Using the traditional rectangular plinth design, the turntable is finished in a high-quality Piano Black finish, as found on many of Pro-Ject's higher-end players.
However, it is within the improved mechanics that the Pro-Ject Debut SE3 really shows its advances. The deck boasts a new 12" platter, compared to the standard 10" on the original Debut III. There's also the same arm as the original model, except it uses a better bearing set for improved performance. There is an upgraded motor employed in the Project Debut S E3 turntable, which benefits from a new suspension system - decoupling the motor from the plinth to reduce the transmission of unnecessary resonance. Similarly, the use of a new rounded belt with a smaller form factor allows for minimal contact area between the motor and the sub-platter. Finally, the Project Debut S/E3 employs a junction box on its underside, allowing users to upgrade their turntable interconnects, to suit their preferences.
The Debut III SE is supplied with a pre-fitted Ortofon Super OM10. The Super OM10 uses the highly respected and long-standing Stylus 10, but it is mounted into an improved cartridge body, compared to the OM5e (as found on the standard ProJect Debut).
Belt Drive/Direct Drive belt_drive
Cartridge Included? Yes - Ortofon OM10
Dimensions WxDxH (mm) 415 x 320 x118
Phono Input No
Replacement Stylus Code Stylus 10
USB Output No
Weight (KG) 7