Synergistic Research Atmosphere X Rel Spec Subwoofer Cable

Synergistic Research Atmosphere X Rel Spec Subwoofer Cable

Atmosphere X REL Spec cables are a surprise breakthrough, much like SR power cords with a fantastic ability to improve nearly all aspects of system performance. Listening notes taken during the development process listed deeper and tighter bass, so much so we were forced to turn down both of subwoofers in our reference system. Other improvements noted was a significant increase in soundstaging and most shocking, increased air and transparency in the high frequencies as well as a more fleshed out mid-range. To make this possible, all current SR Technologies are applied, including a new two-stage high voltage treatment process first developed for our World’s Reference Galileo SX cables and Atmosphere X Tuning Modules, used to voice your cable to your system and personal preference. Also present are pure, handmade silver Air String Geometries and our latest Tricon Silver Matrix geometry with Teflon dielectrics. 

To improve upon the Atmosphere X Reference Rel Spec even further, connect the attached shield ground to a Synergistic Research Ground Block or just a standard wall outlet. In short, these new REL Spec cables should be at the top of the list to audition for anyone with REL Subwoofers wanting to get maximum performance not only in the lower registers but a complete upgrade to the sound of your system.

After perfecting the most natural-sounding and holographic cables in our history, we set out to take them further with a new high voltage conditioning process that applies a sweeping frequency plot for an extended duration. We experimented with dozens of frequencies in different combinations over a prolonged time period before landing on just the right mix. We even built a new Tesla Coil to handle the excess heat generated during long conditioning sessions. Once finalized, the SRX conditioning process created holographic realism and timbrel accuracy far beyond our previous Tesla Coil conditioning protocol.

 

2 each 4th Gen-Tricon

• Silver Copper Matrix: Mono-crystal conductors with a separate ground conductor from shield
• Dielectric: Teflon
• Shielding: Silver Braid -Quantum Tunneled
• Geometry: 1 channel triaxial single ended / 2  channel triaxial balanced

Speakon and Silver Spade Connectors:

Build Notes:

• 11 point-to-point hand soldered connections
• Atmosphere X UEF Graphene Shield: 2 different UEF coatings with Graphene are applied to connectors and cabling and ground significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. The conductors and ground plane also benefit from dampening effect that UEF provides
• Quantum Treatment: After the cable is completely assembled all connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations, creating a canal in the conductor material and contact points at the molecular level that allows electrons to flow more freely. This allows the maximum amount of low level information through the conductors and provides for the highest amount of realism in your music
• Secondary UEF Blue Treatment originally developed for SR Blue Fuses
• Hand build time: 1.5 hours
• 5 day Burn-in: 2 step process