Technics SU-G30 Network Audio Amplifier - Silver - New Old Stock
JENO Engine (Jitter Elimination and Noise-shaping Optimization)
Jitter is a major cause of distortion in digital systems, and is caused by mis-timing in the master clocks used in digital-to-analogue conversion. To eliminate the degradation of sound caused by jitter, Technics has developed an original jitter reduction circuit, comprising a clock generator in the noise-shaping system to reduce jitter in the low-frequency range and a high-precision sample rate converter for suppressing jitter in the high-frequency range. Thus it reduces jitter in an ideal way over the entire frequency range. This works with a newly-developed and original high-precision PWM (Pulse Width Modulation) conversion circuit, optimising the noise-shaping speed, the degree and requantisation error, and the PWM gradation, in order to convert high-resolution signals to PWM without causing any damage to the dynamic range. These new technologies enable the new generation of Technics digital amplifier designs to reproduce the natural and delicate nuances of music.
GaN-FET Driver (High Speed and Low Impedance Power devices)
In the power output section of the amplifier, Technics has employed a high-speed GaN (gallium nitride) FET driver device with super-low resistance. This enables the construction of a high-power amp using a single push-pull configuration, allowing the length of the large current carrying signal path to be shortened, and resulting in outstanding linearity regardless of the sound level.
LAPC (Load Adaptive Phase Calibration)
The impedance of a speaker is not constant: it varies according to frequency, thus altering the loading on the amplifier and therefore potentially the sound. Technics is able to measure an amplifier's frequency amplitude-phase characteristics with speakers connected, and has developed a speaker impedance adaptive optimisation algorithm. Using digital signal processing to achieve the ideal impulse response. Correction processing based on the new algorithm achieves a flat frequency response for both amplitude and phase, which is not possible with a conventional amplifier. Delivering a sound with a rich spatial expression.
High-speed Silent Hybrid Power Supply
With a conventional switch mode power supply, the switching frequency changes in response to the load fluctuation in order to control the switching ON time for stabilising the output voltage. This fluctuation component in the switching frequency has a negative impact on sound quality. The newly developed power supply reduces the noise component harmful to sound quality by fixing the switching frequency. In addition, the latter stage in the switching power supply is provided with a linear regulator to stabilise the output voltage. The linear regulator uses custom, high-definition electrolytic capacitors. What's more, the resonance power supply decreases the level of switching noise, and the PFC (Power Factor Correction) reduces primary current peaks and higher harmonics. The parts used for absorbing noise, such as capacitors, were carefully selected. All possible measures were taken to achieve low noise and reproduce clear sound.
Battery Driven Clock Generator
The best power supply for delicate circuitry such as the clock generator in the new amplifiers is one entirely isolated from any noise or fluctuations in the mains supply. Technics has extensive experience in circuits using battery isolation, having used them to create ultra-low-noise pre-amplifier stages in past analogue amplifiers.
Digital Noise Isolation Architecture
The SU-G30 Network Audio Amplifier receives audio signals from various digital content devices, such as NAS, PCs, USB memory devices, and other digital inputs. Many of these digital content storage systems were originally designed for use with PCs, so low noise – which is required for pure audio reproduction – was never a main design concern. To handle these often noisy sources, the SU-G30 isolates the interfaces for these media to exclude external electrical interference, and also employs a jitter remover, thus offering clear and stable sound, free from noise and distortion.
Ultra Low Distortion Oversampling Digital Filter
An oversampling digital filter, incorporating an original Technics algorithm, shifts digital noise to -160 dB or lower, thus moving any potential distortion far beyond hearing and leaving a rich, detailed sound.
High Res Re-master – enhanced for compressed audio
Technics has developed signal processing to increase both sampling frequency and bit depth: the High Res Re-master system converts audio signals to high resolution at up to 192 kHz/32 bits, to bring the listener closer to the original music.
Sound sources that have been compressed based on the audibility threshold and masking effect of human auditory phenomena. Lack the data necessary to reproduce expansive high-frequency sound, as well as detailed and powerful low frequencies. Because the frequency range is reduced and low level signals are omitted. To solve this problem, Technics has developed High Res Re-master using an original algorithm. As a result, the SU-G30 lets you enjoy natural, expressive and rich sound rivalling that of high-res audio.
You can connect the SU-G30 to a network via a home LAN system using a cable or with a wireless configuration (IEEE802.11a/b/g/n). The built-in Wi-Fi function lets you easily connect to a network without using a LAN cable even if your PC or broadband router is set up in another room.
The SU-G30 is also equipped with a Bluetooth® function that supports aptX® and AAC. This lets you stream music easily from a Bluetooth®-ready device.
This unit includes the MQA (Master Quality Authenticated) technology, which enables playback of MQA audio files and streams, delivering the sound of the original master recording.
TIDAL, Spotify and vTuner Supported
In addition to DLNA and USB playback capability, the SU-G30 supports TIDAL, Spotify Connect and vTuner. For vTuner, use the Technics Music App to select stations and listen to a wide variety of broadcasts.