(Details shown apply to the default selection)
The D2v 3D pushes the boundaries on what you expect from music and home theater performance. With the unparalleled flexibility you have to come to expect from Anthem processors, it provides both the versatility and adjustability you need to ale all of your digital video components work together seamlessly. The results are spectacular.
From riding the third dimension on light cycles in the movie Tron, to racing through the 3D jungles of Pandora in Avatar, the movie experience is always better in triple dimensions. 3D video has a different structure than traditional video so it must pass through the A/V processor without being affected. The new Anthem D2v circuit board automatically detects the presence of 3D video and go into passthrough mode as per a source menu option for video output configuration, passing the 3D HDMI signal from a 3D Blu-ray player to a 3D TV at resolutions up to 1080p. For additional convenience, in passthrough mode the output refresh rate is now automatically matched to the source’s frame refresh rate which is useful for sources that output a mix between 24, 50 and 60 Hz.
It’s now 3D equipped. Fully featured 7.1-channel audio and video processor, 8 HDMI Inputs and 2 Parallel HDMI outputs with the top four ports (HDMI 1 through 4) and top output (HDMI 1) supporting true bypass sensing 3D inputs automatically, Dolby TrueHD, DTS-HD Master Audio, PCM 24/192, highest quality 1080p upscaling with 1080p24 compatibility, Anthem Room Correction, premium quality A/D and D/A converters, 24-bit/192 kHz upsampling on all channels in main zone, two stereo zones.
Sound from HDMI sources plays perfectly, at least it does if you’re using a D2v. Why? In the D2v, all eight HDMI inputs are connected through high-performance TMDS (Transition Minimized Differential Signaling) timing regenerators and multiplexers. The receiver contains a programmable equalizer and a Clock Data Recovery (CDR) function for each of the three TMDS pairs in an HDMI or DVI signal. The TMDS data outputs are regenerated and perfectly aligned to the regenerated TMDS clock signal, creating an extremely clean low-jitter DVI/HDMI signal that is easily decoded by the HDMI receiver. This is particularly useful for cleaning up a noisy/jittery source, or when a long or low-quality cable is being used.
Broadcast-Quality Digital Video Processing
Be the first to Write a Review for this item!
Home > Hi Fi > Streamers, Music Servers & Media Players