WBT-0710 Nextgen Pole Terminals
Zoom  Zoom
 WBT-0710 Nextgen Pole TerminalsWBT-0710 Nextgen Pole Terminals 

WBT-0710 Nextgen Pole Terminals

£91.67 Exc. VAT |  |


WBT-0710 Nextgen Pole Terminals

External connection

The smart design of the signal conductor enables a secure termination of cable ends, banana plugs and crimped cable ends.

Internal connection

Soldering lugs which can be bent by hand if necessary. WBT recommends application of the silver solder WBT-0800/0805 which is gentle to the precious surfaces.


Mounting insulators are included to ensure not only insulated, but also torsion-resistant mounting and polarity identification of the terminals. In case of hi-fi devices being strongly exposed to impact sound such as loudspeakers it is recommended to use an additional nut locking aid which is the fluid screw retention LOCTITE 4804. It is matched with WBT high tech plastics, and it is removable. Besides, WBT recommends using the impact sound interrupter WBT-0718.


Conductor cross section (max.): outside: 10 mm² (7 AWG)
inside: 4 mm² (11 AWG)
Connection technology: outside: 4 mm banana plug, spades (6 - 8 mm spade), crimping
inside: soldering or 6.3 mm flat push-on cable shoe
Wall thickness: from 0.9 to 6.5 mm (from 4.5 mm without puzzle plate)
Identification: red, white or black

Be the first to Write a Review for this item!

Related Products
WBT-0703 4mm Pole Terminal
WBT-0705 Nextgen Pole Terminals
WBT-0708 Nextgen Pole Terminals
01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket 
Analogue Seduction