Manufacturer
Browse Shop
Pro-Ject Drive Belt - RPM9/9.1/9.1X/10 Square Belt
Zoom  Zoom

Pro-Ject Drive Belt - RPM9/9.1/9.1X/10 Square Belt

  (2 Reviews)

Original Pro-ject replacement part

£25.99    
£21.66 Exc. VAT |  |

Pro-Ject RPM 9 (9X,9XP)/RPM 9.1,9.1X/RPM 10 Square Drive Belt

Pro-Ject  replacement drive belt 

This is a large square belt, which is designed for use with the completely decoupled motor found on Pro-Ject RPM 9 and 10 models. The belt is of a smooth rubber, and the rounded construction allows for minimal contact with the platter, reducing the transfer of any resonance from the motor unit.

For use with the following Pro-ject Turntables:

  • RPM 9 (9X, 9XP) 
  • RPM 9.1/9.1X 
  • RPM 10

A straight replacement when your belt becomes worn, changing your belt on a regular basis will ensure your turntable runs with the correct pitch.

Average Rating (2 Reviews):  
Write a Review and share your opinions!

Rating:  
PRO-JECT DRIVE BELT - RPM9/9.1/9.1X/10 SQUARE BELT
15 June 2023  | 

Got w&f down to 0.05% but a bit pricey.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Perfect Drive Belt
09 April 2021  | 

I bought this replacement belt because old one makes audible noise on the motor spindle while spinning. After the replacement this troublesome noise was completely gone. Another benefit is almost negligible RPM variation. I’m really satisfied with new belt.

Was this helpful to you?  Yes  /  No

This review has not been appraised.

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket 
Analogue Seduction