Manufacturer
Shop by Price
Pro-Ject Xtension 10 Evolution Turntable with Ortofon Cadenza Black
Zoom  Zoom
Pro-Ject Xtension 10 Evolution Turntable with Ortofon Cadenza BlackPro-Ject Xtension 10 Evolution Turntable with Ortofon Cadenza BlackPro-Ject Xtension 10 Evolution Turntable with Ortofon Cadenza Black

Pro-Ject Xtension 10 Evolution Turntable with Ortofon Cadenza Black

Saving of £750 off the Ortofon Cadenza Black 

£3,600.00   
£3,000.00 Exc. VAT |  
  

|

Manufacturer:  Pro-Ject

Finish:  
Cartridge:  

Pro-Ject Xtension 10 with Ortofon Cadenza Black

THE LITTLE BROTHER OF XTENSION GUARANTEES SUPERLATIVE VINYL PERFORMANCE IN A MORE COMPACT SIZE!

Xtension 10 Evolution is ideal for all, who look for sound quality of standard Xtension in a more compact size below 48cm width, to fit standard audio racks. It incorporates all of our 20 years experience in turntable design. Xtension 10 chassis is made from MDF filled with metal sand, that gives high mass and is non-resonant. Magnetic feet, which decouple the main plinth from its base, are combined with a weighty 22 kg total turntable mass. The result is a unique combination of ‘mass loaded’ and ‘floating turntable’ design principles.

Instead of the old standard adoption of pure metal used for the main platter, we’ve found a perfect alloy which we damped on the inner side with Sorbothane®. Additionally, we’ve glued recycled Vinyl records to the top (which act as a perfect mat) and bake this ‘sandwich’ before precision balancing it. The final product subsequently benefits from a wonderfully resonance-free, heavy platter, that runs ultrasilently on an inverted ceramic ball bearing with magnetic suspension.

The Pro-Ject 10cc Evolution with its tonearm base also benefits from ‘high-mass’ technologies and is isolated from the main board by a sheet of Sorbothane®. To use this tonearm with a wide range of top quality phono cartridges, from 4 to 14 Grams. it comes with a set of 4 different Sorbothane®- damped counterweights. Xtension 10 Evolution comes with a beautiful dustcover with adjustable hinges, as well as in high gloss lacquer finishes: mahogany, piano and olive.

Ortofon Cadenza Black Moving Coil Cartridge 

The Cadenza Black is the flagship of the popular Cadenza range of Moving Coil cartridges. It employs a pristine-cut Nude Shibata stylus with a boron cantilever. The effective mass of the stylus/cantilever system is extremely low due to the use of a very thin boron rod; this material is extremely stiff and even more lightweight than aluminium, making it a real premium component choice. 

The Black model  also uses the WRD (Wide Range Damping-system), controlling the high and low frequency damping separately. The coil wire is the famous Ortofon Aucurum wire, which is a gold plated version of the popular 6NX copper wire. 

Cadenza Black is optimized for an amazing tonal neutrality, dynamics and purity of sound. It is high performing on areas like detail, consistency and sound staging.

Specifications:

Output Voltage (at 1kHz, 5cm/sec):
330μV
Channel Balance at 1kHz:
< 0.8dB
Channel Separation at 1kHz:
> 27dB
Channel Separation at 15kHz:
> 20dB
Frequency Range (at -3dB):
20 Hz - 60 kHz
Frequency Response 20Hz - 20kHz:
+1.5 / 0
Tracking Ability at 315Hz:
Typically 90μm
Compliance, Dynamic, Lateral:
16μm / mN
Stylus Type:
Nude Shibata
Cantilever:
Boron
Stylus Tip Radius r / R:
6 / 50μm
Tracking Force Range:
2.0 - 2.5g (20 - 25mN)
Recommended Tracking Force:
2.3g (23mN)
Tracking Angle:
20º
Internal Impedance / DC Resistance:
Recommended Load Impedance:
> 10Ω
Cartridge Body Material:
Stainless Steel Aluminium
Cartridge Colour:
Black / Black
Cartridge Weight:
10.7g

Specifications:

Speeds:
33 / 45 / 78 RPM
(Speed Box DS Built-In)
Acrylic Dust Cover:
Yes
Tonearm Cable Included:
Pro-Ject Connect-It 5P-C
Aluminium Feet:
Magnetically Supported
Sorbothane Damped
T/T Main Bearing Damping:
Heavy-Weight Metal Block
Maximum Speed Variance:
± 0.08%
Maximum Wow & Flutter:
± 0.01%
Rumble:
-73dB
Platter Weight / Diameter:
5.7kg / 300mm
Effective Arm Length / Overhang:
254mm / 16mm
Effective Tonearm Mass:
8.5g
Tracking Force Range:
10 - 30mN
Cartridge Weight Range:
4 - 14g
(4 Different Counterweights)
External Power Supply:
220 - 240V / 50Hz Supply
16V / 1.000mA AC Output
Dimensions (W x H x D):
480 x 235 x 400
480 x 495 x 535 (Lid Open)
Weight:
22kg

Be the first to Write a Review for this item!

Customers who bought this item also bought:

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket