Quad QC-24 Pre Amplifier - New Old Stock
Please Note: This item is a Line level Pre Amp only, there is no built in phono stage
For the analogue purist, the combination of a good valve amplifier and a good turntable is the closest possible approach to the original recording. There are two options for adding such functionality to our valve pre-amplifiers.
A solid-state module is available for the standard QC-twenty four pre-amplifier (known as the QC-24 phono stage), which allows direct connection of a turntable with an internal switch to change between moving coil and moving magnet cartridges. This can be fitted as standard or added later.
.JPG)
| Valve Complement | 1x 6111 twin triode |
| THD @ 1V RMS | <0.2% |
| Frequency Response | 5Hz - 50kHz (+0dB/-0.5dB) |
| Hum and Noise | Better than -80dB |
| Line Stage Gain | 15dB |
| Recommended Minimum Load | 50 k Ohms |
| Inputs | 5 × Line level﹡,2 × Buffered tape loops |
| Power Consumption | 15VA maximum |
﹡Note: Phono input is line level unless optional phono stage is added.
.JPG)
.JPG)
.JPG)
[1].JPG)
[2].JPG)
[3].JPG)
[4].JPG)