Trichord Diablo 'Never Connected Gen2' Power Supply with Power Interconnect Upgrade

Trichord Diablo 'Never Connected Gen2' Power Supply with Power Interconnect Upgrade

Now available in silver or black

The Ultimate Power supply for the Diablo

The NCPSUs have completely different electronics to any conventional dc power supply. Instead of an oversized toroidal transformer, there is a PCB mounting variety followed by the revolutionary noise reduction circuitry that is called 'Never Connected'.

Although the regulation circuit is physically connected to the incoming mains, it is disconnected electronically. A monitoring circuit detects the portion of the sinewave that is charging the first of a pair of electrolytic capacitors. Once this first capacitor is fully charged, the diode bridge rectifier turns off and a mosfet switching circuit transfers the charge from the first cap to the second. This cycle is repeated continuously.

At no piont in time is the regulation circuitry electrically connected to the incoming rectified mains - hence the term 'Never Connected'. The overall result is a large and measurable reduction in mains borne noise. This dramatic reduction of mains borne noise enables the Diablo phono circuit to give of its very best.

Specifications

- Output Voltage: -0V - +22Vdc, 0V - -22Vdc
- Output Current: +/- 0.5 Amps DC
- Mains Input Lead: 3 PIN IEC Moulded, Socket on Rear of PSU
- Mains Input Voltage: 230Vac (110Vac USA and Japan)
- Dimensions: 117 x 190 x 55 (mm) (W x D x H)
- Materials Used: Metal Casework to Match Diablo Phono Stage  

The power lead upgrade replaces the standard power interconnect lead provided with the 'Dino+' power supply.

It carries power between the 'Dino+' power supply and the Dino phono stage.

A major upgrade in sonic performance is experienced when this lead is used.

Can also be used with Orca pre-amp and Delphini phono stages.

This lead will give a major sonic upgrade to the following Products:

Orca with Standard Large PSU or NCPSU
Delphini Mk1 and Mk2 with Std PSU or NCPSU 
Delphini Mk1 and Mk2 with NCPSU
Dino with 'Dino+' or NCPSU
Diablo with PSU1 or NCPSU

A major upgrade in sonic performance is experienced when this cable is used.