Manufacturer
Pro-Ject NRS Box S3 (Noise Reduction System)
Zoom  Zoom
Pro-Ject NRS Box S3 (Noise Reduction System)Pro-Ject NRS Box S3 (Noise Reduction System)Pro-Ject NRS Box S3 (Noise Reduction System)

Pro-Ject NRS Box S3 (Noise Reduction System)

  (4 Reviews)
¥55,225.59    
¥46,020.69 Exc. VAT |  |
  

Pro-Ject NRS Box S3 (Noise Reduction System)

De-Crackling function to reduce clicks
Reduces noise of vinyl records and motor noise
Galvanic bypass to system invisibility
Compact S3-line casework
 
The Vinyl NRS Box S3 is designed with the sole purpose of bringing enjoyment back to older vinyl records that may have worn to a point where they are now impeded by high surface noise and audible crackling, even when clean. With its sophisticated digital signal processing, you can listen to those records again like new.  
 To use the Vinyl NRS Box S3, it needs to be connected to a turntable system via its Line Level input, so it only works after the phono stage in the signal path. Once connected, it should simply be switched on and the “De-Crackle” function will initiate. The strength of this process can be tuned using the front-mounted dial and can even be increased further by clicking the Intensity button. Separately, the Vinyl Noise Reduction System can be started with a push of the VNRS button, dramatically reducing vinyl surface noise and turntable motor noise.  
 Thanks to its sophisticated digital signal processing algorithms, the Vinyl NRS Box S3 first converts the analogue music to a high resolution 24-bit / 96kHz digital format for minimal signal loss, and then separately initiates each process – depending on the current settings and the position of the De-Crackle dial. This allows you to run one or both processes at the same time. For times when the input signal is too high, the -6dB switch allows for the original signal to be attenuated before passing to the digital stage.
The premium internal componentry and one-board design keeps noise and distortion very low in the system, meaning that the audio you experience after the Vinyl NRS Box S3 feels completely natural and original. For times when you do not need the Vinyl NRS Box S3, you can simply switch the box off and a galvanic bypass will directly link the RCA inputs to the RCA outputs for a completely untouched signal path. 
The Vinyl NRS Box S3 is a unique proposition for vinyl lovers. A compact, versatile box that makes old, worn records listenable again, but when is not required it completely disappears from the signal chain. Experience your whole vinyl collection exactly as you remember it with the Vinyl NRS Box S3. 
 
 
Key Features:
NEW De-Crackling function to reduce clicks
NEW noise reduction for vinyl records
NEW reduces noise of the turntable drive
Processing based on DSP with 24 bits
96 kHz sampling rate for precise processing
Galvanic pure bypass if switched OFF
Ideal transfer characteristics and linearity
De-Crackling with adjustable sensitivity
Line-level operation
Compact design in standard S3-line case
Full aluminium housing
Available in silver or black
 
Technical Data
Operation: Line Level
Input Voltage, typically: 300-500 mVrms
Max. input voltage (clipping) 4.4Vpp, 1.55Vrms
Clip indication: -0.6dB below real clipping
Internal sampling and calculations: 96 kHz/24 bits
Internal processing: 56-bit accumulator
Inputs: 1 x RCA Pair (Line Level)
Outputs: 1 x RCA Pair (Line Level)
THD: <0.017% (1500 mVrms Input Level)
Frequency Response Characteristics: 20Hz – 20kHz: -0.6 / +0.1dB 30Hz – 20kHz: -0.2 / +0.1dB
De-Crackling Reduction: 5dB (3kHz – 20kHz) 8dB (2kHz – 20kHz)
VNRS Reduction: Up-to 6dB (20Hz – 20kHz)
Galvanic Bypass: < 0.3Ω
Dimensions w x h d: 103 x 37 x 125mm (including sockets)
Finish options: Silver & Black
Average Rating (4 Reviews):  
Write a Review and share your opinions!

Rating:  
NRS S3 Box
13 December 2022  | 

It suppresses background noise very well. There is almost silence between songs and in quiet passages. Weak and medium cracking will reduce, but not eliminate. They thus partially disappear in the music. Large pops with low effect only. A big help for slightly and moderately worn records.

Was this helpful to you?  Yes  /  No

1 of 1 people found this review helpful.


Rating:  
VNRS Box S3
22 November 2022  | 

Relativelly effective nice box. De-Crackle is best on mild used recors, but helps with worn record too. Best results with light crackling, only low effect on deep pops. Also on MN or M new records VNRS function makes lot of work in reducing surface noise.

Was this helpful to you?  Yes  /  No

2 of 2 people found this review helpful.


Rating:  
Vinyl click reduction device
20 October 2022  | 

Provides an interesting way to reduce clicking, popping and reduction of background noise on vinyl. More applicable to older and worn vinyls and certainly has an effect without impacting quality of the sound noticeably.

Was this helpful to you?  Yes  /  No

3 of 3 people found this review helpful.


Rating:  
Pro ject nrs box s3
13 October 2022  | 

Well,in few words...there is no magic here.
Crackling sounds are still present even after max settings but the noise reduction works perfect.It removes all background noise on the record.Really fantastic job done with that so called VNRS(noise reduction system)This small box will also remove most faint crackles but not the loud ones.Near mint will be something like mint so if you have a nice clean record collection but are in search for some perfection this unit is for you.

Was this helpful to you?  Yes  /  No

6 of 6 people found this review helpful.

01733 350 878
GBP EURO USD YEN   TOTAL: ¥0.00    View Basket 
Analogue Seduction