Manufacturer
Dali Rubicon LCR Loudspeaker
Zoom  Zoom
Dali Rubicon LCR LoudspeakerDali Rubicon LCR LoudspeakerDali Rubicon LCR Loudspeaker
Dali Rubicon LCR LoudspeakerDali Rubicon LCR Loudspeaker

Dali Rubicon LCR Loudspeaker

£1,299.00    
£1,082.50 Exc. VAT |  |
  

 

Dali Rubicon LCR Loudspeaker

 

Low-loss technology

The cone used in the RUBICON series draws upon the heritage from the EPICON technologies, and has a light, rigid and randomly uneven structure. This lower the complexity of the central part of the motor, ensures even piston like movements, reduces the possibility of surface resonance greatly and creates an extremely low distortion within the RUBICON series. The soft low-loss rubber surround is designed and bespoke specifically for the RUBICON series, and all of the components are situated in an aluminum chassis designed for maximum airflow around the cone and magnet system. 

Tweeters

In the RUBICON series, DALI makes use of both the soft dome tweeter working alone, and the hybrid tweeter configuration an amazing rendering of the high frequencies. The voice coil used in the RUBICON series is designed to be very light and agile in order to achieve a broader bandwidth. This lighter voice coil is placed inside a powerful ferrite magnet that keeps a tight control of its movements. The ribbon tweeter is the master of wide dispersion and combining it with the soft dome, the tweeter module starts working as low as 2.5 KHz. This extreme bandwidth combined with the ultra wide dispersion is an important part of the DALI sound philosophy. 

Speaker Type Center
Front
On-Wall
Rear
Surround
Frequency Range (+/-3 dB) [Hz] 59 - 34.000
Sensitivity (2,83 V/1 m) [dB] 89.0
Nominal Impedance [Ω] 4
Maximum SPL [dB] 109
Recommended Amplifier Power [W] 20 - 150
Crossover Frequency [Hz] 3,100/ 14,000
Crossover Principle 2 + ½-way
High Frequency Drivers 1 x 17 x 45 mm  Ribbon
1 x 29 mm  Soft Textile Dome
Low Frequency Driver 1 x 6½"  Wood Fibre Cone
Enclosure Type Bass Reflex
Bass Reflex Tuning Frequency [Hz] 49,0
Connection input(s) Single Wire
Magnetic Shielding No
Recommended Placement Above/Below TV Screen
On-Wall
Recommended Distance From Wall [cm] 0 - 30
Dimensions With Base (HxWxD) [mm] 468 x 278 x 146
Weight [kg] 8.0
Accessories Included Manual
Micro Fibre Cloth
Rubber Bumpers
Finish Black High Gloss Lacquer
Rosso Veneer
Walnut Veneer
White High Gloss Lacquer

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket 
Analogue Seduction