Manufacturer
Shop by Price
Browse Shop

IMPORTANT NOTICE REGARDING COVID-19

Online orders are operating as normal. Read more here »

Dali Rubicon 6C Wireless Loudspeakers
Zoom  Zoom
Dali Rubicon 6C Wireless LoudspeakersDali Rubicon 6C Wireless LoudspeakersDali Rubicon 6C Wireless Loudspeakers

Dali Rubicon 6C Wireless Loudspeakers

£5,540.00    
£4,616.67 Exc. VAT |  
  

|
Finish:  

 

Dali Rubicon 6C Wireless Loudspeakers

Dali's latest addition to the Rubicon range: the 3C and 6C wireless speakers boast phenominal sound with intelligent amplification and flawless wireless technology. The 6C floorstander borrows the tried and true drivers from the Epicon speakers, delivering exceptional sound with powerful bass, even in a large room.

SMC

The use of SMC (Soft Magnetic Compound) in the Rubicon 6 C has many advantages, but the overshadowing result is a significant reduction of distortion from the mechanical loss in the magnet motor. SMC’s unique ability to deliver a high magnetic conductivity and a very low electrical conductivity gives us all the wanted qualities of a really good speaker magnet without the traditional downsides.

Part of the “secret” is the individually coated magnetic granules that make it possible to mould a strong magnet that’s not electrically conductive (approx. 1/10.000’s of iron). The result of using SMC is almost no hysteresis, and therefore no distortion.

AMPLIFIER

Designing a ‘best in class’ active speaker system is the sum of many parts. One truly important part is the amplifier, or more correctly the amplifier module.

Using a digital crossover in place of the Rubicon’s analogue one, the two amplifiers in each speaker drives the woofers and tweeters directly. This lets the acoustical engineer optimize the interaction between amplifier and driver perfectly bringing out even more detail from the source material than possible before.

The 6½” wood fibre SMC based woofer delivers the mid-range and bass frequencies fed by one of the two 250-Watt amplifiers. The combinations of the low loss design, the wood fibre membrane and the SMC pole piece makes this woofer able to work with minimal distortion of the amplifier signal. This together with the extremely musical Class-D amplifier delivers audio with lots of dynamic detail.

Our Class D amplifier is based on patented state-of-the-art technology with a global feedback, selfoscillating design chosen for its very musical properties. Being able to deliver 250 Watts for up to 5 seconds, there is plenty of power to ensure more than enough sound pressure even in complex musical passages or massive explosions in movies.

WOOFER

The cone used in the Rubicon 6 C draws upon the heritage from the Epicon technologies, and has a light, rigid and randomly uneven structure. This lower the complexity of the central part of the motor, ensures even piston like movements, reduces the possibility of surface resonance greatly and creates an extremely low distortion within the Rubicon 6 C.

The soft low-loss rubber surround is designed and bespoke specifically for the Rubicon 6 C, and all of the components are situated in an aluminum chassis designed for maximum airflow around the cone and magnet system.

TWEETER

The ultra-lightweight soft dome tweeter used in the Rubicon 6 C is designed to reach higher into the very high frequencies. Higher than normal for at soft dome used in a Dali hybrid tweeter. This is done since the soft dome tweeter is required to work on its own in the Rubicon 6 C.

The voice coil used in the Rubicon 6 C is furthermore designed to be very light and agile in order to achieve a broader bandwidth. This lighter voice coil is placed inside a powerful ferrite magnet that keeps a tight control of its movements.

CABINET

The Rubicon 6 C floorstanding speaker delivers richly defined detail and big bass response. The gracefully elegant exterior of the Rubicon 6 C works as the base for the low-loss drivers. In every cabinet, the mid-range and bass drivers are separated into their own chambers. Turbulence is minimized through a bass reflex port, which is placed directly behind every woofer, and the timing between the woofer and the bass port is thereby also optimized.

 

Product series RUBICON C
Frequency Range (+/-3 dB) [Hz] 37 - 30.000
Maximum SPL [dB] 110
Crossover Frequency [Hz] 800 - 2,600 - 14,000
Crossover Principle Hybrid Full Active 24 bit DSP and Passive all analogue
Hybrid tweeter module, Super high freq. driver, Quantity 1 x 17 x 45 mm
Hybrid tweeter module, Super high freq. driver, Diaphragm type Ribbon
Hybrid tweeter module, High frequency driver, Quantity 1 x 29 mm
Hybrid tweeter module, High frequency driver Diaphragm type Soft Textile Dome
Low frequency driver, Quantity 2 x 6½"
Low frequency driver, Diaphragm type Wood Fibre Cone
Enclosure type Bass Reflex
Bass Reflex Tuning Frequency [Hz] 36.5
Max. Amplifier Power Output [RMS watt] 250
Amplifier Type Discrete Class D (Closed Loop, Self Oscillating)
Onboard DAC Burr Brown PCM1796 (Balanced output)
Connection Input ADC-in (RCA)
Wireless Input(s) Full 24 Bit / 96 kHz (No bit-loss attenuated)
Max. Digital Resolution [bits/KHz] 24 / 96
Magnetic Shielding  
Recommended Placement Floor
Recommended Distance From Wall [cm] 20 - 180
Max. Power Consumption [W] 325
Standby Power Consumption [W] 1.2
Dimensions With Base (HxWxD) [mm] 990 x 200 x 380
Accessories Included Manual
Micro Fibre Cloth
Rubber Bumpers
Front Grille
Spikes M8
Weight [kg] 20.8
Input Sensitivity [mV] 1,250
Input Impedance RCA [Ω] 5k
Input Mains Voltage [Volts] Universal mains 100 - 240V

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket