Manufacturer
Browse Shop
Clearaudio Basic V2 Phono Stage
Zoom  Zoom
Clearaudio Basic V2 Phono StageClearaudio Basic V2 Phono StageClearaudio Basic V2 Phono StageClearaudio Basic V2 Phono Stage

Clearaudio Basic V2 Phono Stage

£1,140.00    
£950.00 Exc. VAT |  |
  

Clearaudio Basic V2 Phono Stage

Its predecessor, the basic plus, was a multiaward winner and with the V2 we’ve taken all of that coveted ‘Plus’ technology up a notch

There’s nothing basic about the basic V2 phono stage. Don’t be fooled by its cool, minimalist design. Within that sleek aluminum casing (with silver or black anodized finish) lies an inner world of highly refined features. Its predecessor, the basic plus, was a multiaward winner and with the V2 we’ve taken all of that coveted ‘Plus’ technology up a notch.

On the outside, we’ve kept it very simple. There’s just one visible control, a single power switch on the upper surface that opens up a raft of possibilities. On the underside you can switch between moving coil and moving magnet mode. From there, you can easily enjoy the basic V2 with almost any high-end phono cartridge without making any further adjustments.

Or, you can choose from a range of performance enhancing settings to fine-tune its parameters to your system and your heart’s content. An optional subsonic filter attenuates any unwanted low frequency noise, while RIAA equalization accuracy is within 0.1 dB.

All of which adds up to the basic V2 being the perfect all-rounder for both audiophiles and music lovers.

TOTAL WEIGHT

Approx. 1.2 kg (Preamp and power supply)

DIMENSIONS

Preamp

Width
4.65 inches
Depth
5.71 inches
Height
1.65 inches

Power Supply

Width
3.94 inches
Depth
2.17 inches
Height
3.46 inches

MATERIAL/COLOR

Silver & Black

MODE MM/MC (Subsonic filter switchable)
AMPLIFICATION @ 1 KHZ +46 dB (MM mode)
+66 dB (MC mode)
INPUT IMPEDANCE 47 kOhm / 270 pF / MM mode
500 Ohm / 270 pF / MC mode
MM / MC INPUT switchable (at bottom)
RIAA 75 μs / 318 μs / 3180 μs, 2 passive filter
RIAA ACCURACY ± 0.10 dB
THD < 0.002% (IEC A)
SIGNAL TO NOISE RATIO -72 db (MM mode)
-67 dB (MC mode)
CHANNEL SEPARATION > 90 dB (@ 1 kHz)
MAX. OUTPUT VOLTAGE >10 V (@ 1 kHz)
SUBSONIC FILTER 20 Hz (–18 dB / Oct.; switchable on bottom panel, on each channel)
POWER CONSUMPTION Max. consumption in operation: 3 watts
Standby mode: <0.3 watts
POWER SUPPLY ± 18 V DC (external power supply, 1.4m cable length)
OUTPUT CONNECTIONS Unbalanced (RCA)
Amplification @ 1 kHz 44 dB (MM mode)
63 dB (MC mode)
Input impedance 47 kOhm / 220 pF / MM mode
510 Ohm / 220 pF / MC mode
MM / MC input switchable (on bottom panel)
RIAA delay time: 75 μs / 318 μs / 3180 μs
RIAA accuracy ± 0.1 dB
Distortion 0.001% (IEC A)
Signal to noise ratio 89 dB (MM Mode)
74 dB (MC Mode)
Channel separation > 92 dB (@ 1 kHz) / opposed channel hot-wired
Max. output voltage 10.5 V (@ 1 kHz)
Subsonic filter 20 Hz: –3 dB / Oct
Power supply ± 18 V DC (external power supply)
Output connections Unbalanced (RCA)
Balanced (XLR)
Power consumption Max. consumption: 6.6 Watt
Consumption in operation: 6.6 Watt
Off mode: 0.0 Watt (turned off at rear panel)
Total weight Approx. 1.8 Kg (Preamplifier)
Approx. 2.5 kg (Power supply)
Dimensions (W/D/H in inches) Preamp: 7.09 x 8.66 x 2.17
Power Supply: 7.09 x 7.28 x 2.17
Dimensions (W/D/H in mm) Preamp: 180 x 220 x 55
Power Supply: 180 x 185 x 55
Warranty 3 years*
* Only if the Manufacturer's guarantee card is filled out correctly and sent back within 2 weeks to Clearaudio.

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket