Online orders & demonstration rooms are operating as normal. Read more here »
PLEASE NOTE WE CAN ONLY SEND LYRA CARTRIDGES TO UK and IRELAND addresses
This is a special, built-to-order, version of Kleos for expert users with very high-gain, extra low noise phono stages, or alternatively a step-up transformer designed for phono cartridges of 2 - 3 ohms or less. Most users (and phono stages) will benefit from the regular Kleos with much higher output and considerably more energy; resulting in a much better signal-to-noise ratio. If you are in doubt about which version of Kleos that will work best in your system, please go with the regular Kleos.The Kleos SL may provide extra pure and pristine sound from an audio system that is optimized for a low-impedance, low-output cartridge. However, this may be accompanied with a lesser level of energy and power.Lyra nevertheless has decided to offer SL models, as built-to-order at a 10% surcharge, for those who are confident that they can extract the benefits from such a low-output MC phono cartridge.
SPECIFICATIONS FOR KLEOS SL
• Designer: Jonathan Carr • Builder: Yoshinori Mishima (final build, testing), Akiko Ishiyama (preliminary build)• Type: Medium weight, medium compliance, low-impedance, low-output moving coil cartridge• Stylus: Lyra-designed long-footprint variable-radius line-contact nude diamond (3um x 70um profile, block dimensions 0.08 x 0.12 x 0.5mm), slot-mounted• Cantilever system: Solid boron rod with short one-point wire suspension, directly mounted into cartridge body • Coils: Single layer, 6N high-purity copper, square-shaped chemically-purified high-purity iron former, 2.7ohms self-impedance• Output voltage: 0.25mV@5cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results)• Frequency range: 10Hz ~ 50kHz• Channel separation: 35dB or better at 1kHz • Compliance: Approx. 12x10-6cm/dyne at 100Hz • Vertical tracking angle: 20 degrees
• Cartridge body: One-piece machining from solid 7075 alloy billet, with reduced-surface higher-pressure headshell contact area, partially non-parallel shaping, phase-interference resonance-controlling mechanism, and body threaded directly for mounting screws• Cartridge mounting screws: 2.6mm 0.45 pitch JIS standard • Distance from mounting holes to stylus tip: 9.5mm • Cartridge weight (without stylus cover): 8.8g • Recommended tracking force: 1.65 ~ 1.78g (1.72g recommended) • Recommended load directly into MC phono input: Determine by listening, • Recommended load via step-up transformer: Use a step-up transformer designed for 2 - 3 ohms cartridge impedance. The transformer output must be connected to standard 47kohm MM-level RIAA input, preferably via short, low-capacitance cable • Recommended tonearms: High-quality pivoted or linear tangential tonearms with rigid bearing(s), adjustable anti-skating force, preferably VTA
Be the first to Write a Review for this item!
Home > Hi Fi > Cartridges and Styluses > Cartridges