Grado Statement Platinum 2 Phono Cartridge
All Statement Series2 cartridges offer a low mass generating system, and a diamond cut specially for Grado. In addition the Reference2 and Master2 are installed with a boron cantilever. All this is hand-assembled within a machined, Australian Jarrah wood housing. The output for the Statement Series2 measures at 1.0 mV. The low frequency information and its portrayal of bass dynamics are solid, powerful and authoritative. The midrange is rich, complex and highly believable. Its top-end seems to extend forever with speed and remarkable delicacy. Imaging is detailed and precise with a sound stage that wraps its arms around you and draws you into the music.
The Statement Series of wooden cartridges are a fixed coil design, hand-crafted at Grado Labs in Brooklyn. An intricate procedure of curing is done between production steps to achieve optimal sonic quality. This series generator/stylus module is not replaceable* allowing a one-piece magnetic circuit and a reduction of chassis resonances. The Statement Series utilizes manufacturing and assembly techniques of fantastic accuracy and precision, and the result is virtual perfection. Should be used only with the finest equipment.
The Platinum2 and Sonata2 models use a modified four piece OTL cantilever technology achieving a 10% tip mass reduction over the Prestige series and ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils. The Platinum2 model uses Grado's specially designed elliptical diamond mounted on a brass bushing, and the Sonata2 model uses Grado's specially designed nude elliptical diamond.
* All wooden series cartridges are 1/2" mount. 78 RPM styli are not available with these series. All re-tipping on the Statement and Reference series must be done by Grado.
Sonata2 & Platinum2:
OUTPUT: 1mV @ 5 CMV
CONTROLLED FREQUENCY RESPONSE: 15-55 KHZ
CHANNEL SEPARATION: AVERAGE 30 DB - 10-30 KHZ
LOAD: 47,000 OHMS
INDUCTANCE: 30 mh
RESISTANCE: 72 OHMS
NON SENSITIVE TO CAPACITIVE LOAD
CHASSIS MASS: 10 GRAMS
TRACKING FORCE: 1.5 - 1.9 GRAMS