Manufacturer
Shop by Price
NEW
Dynavector DV XX2. MKII Moving Coil Cartridge (Previously Owned)
Zoom  Zoom
 Dynavector DV XX2. MKII Moving Coil Cartridge (Previously Owned)Dynavector DV XX2. MKII Moving Coil Cartridge (Previously Owned) 

Dynavector DV XX2. MKII Moving Coil Cartridge (Previously Owned)

£950.00    
£791.67 Exc. VAT |  
  

|

Please note we can only supply Dynavector products to the UK

Dynavector DV XX2 MKII Moving Coil Cartridge (Pre Owned)

Excellent Condition,Tried and Tested, sound great, all accessoroies and packaging. 2 Years Old, Light use, approx 150 hours wear.

The DV XX-1 was the first cartridge to feature a "magnetic flux damper" (patent) and softened magnetism" (patent) processes that reject the magnetic fluctuation that is detrimental to a moving coil cartridges performance.

The The DV XX-2 MKII retains the benefit of the flux damper but features the Alinco-5 magnet and the similar rigid construction to the Te Kaitora Rua. Alnico magnets exhibit high magnetic flux density combining with a low coercive therefore magnetic resistance is lower than other magnetic types such as rare earth and ferrite, providing the exceptional stability of the XX-2 MKII output voltage. There is also the additional advantage of low magnetic and electrical resistance contributing to a discernable improvement in sound quality.



The XX-2MKII also exhibits deep powerful bass, treble is both clear and lively possessing none of the hardness found in many moving coil designs.

The XX-2MKII also features a 6 mm solid boron cantilever fitted with a Pathfinder Line contact stylus. PCOCC (pure copper ohno continuous casting process) copper wire is used for the coil. The output voltage of 0.28mV is higher than that of the XX-2 and 6 ohms impedance are suited to most moving coil phono stages.



For ridgity of construction the XX-2 MKII cartridge body is machined from 7075 aluminium the hardest available. However, having only a total weight of only 8.9 grams it is suitable for a variety of popular tonearms.


SPECIFICATIONS:

  • Type: Low output moving coil cartridge with Alnico magnet and Flux damper
  • Output Voltage: 0.28mV (at 1KHz, 5cm/sec.)
  • Channel Separation: 30 dB (at 1KHz)
  • Channel balance: 1.0 dB (at 1KHz)
  • Frequency response: 20 - 20,000Hz (± 1dB)
  • Compliance: 10 x 10-6 cm/dyn
  • Tracking force: 1.8 - 2.2 grams
  • Impedance: R=6 ohms
  • Recommended load resistance: > 30 ohms
  • Cantilever: 6mm length 0.3 mm dia. solid boron
  • Stylus: 0.14 x 0.08 mm Line contact PF
  • Weight: 8.9 grams

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket