Manufacturer
Audio Technica AT-OC9XSH MC Phono Cartridge
Zoom  Zoom
 Audio Technica AT-OC9XSH MC Phono CartridgeAudio Technica AT-OC9XSH MC Phono Cartridge 

Audio Technica AT-OC9XSH MC Phono Cartridge

  (1 Review)
£599.99    
£499.99 Exc. VAT |  |

Audio Technica AT-OC9XSH MC Phono Cartridge

Audio Technica AT-OC9XSH Dual MC Phono Cartridge features a shibita stylus with nude square shank that distinguishes it from the rest of the OC9X series cartridges, specially built for extraordinary channel separation.

PCOCC Coil

Pure Copper Ohno Continuous Casting coils is employed to attain a perfect audio reproduction and are configured in a reverse V-shape that results in lower pressure exertion on the stylus to reduce distortion.

Audio Quality

The robust aluminum build reinforces sound quality and lowers resonance, a neodymium magnet and yoke of premium permendur construction that drastically raise magnetic energy, and nude Shibata stylus on a boron cantilever that traces the record groove with ultimate accuracy for rich, full-scope audio and high transient response. The cartridge body is pre-threaded so you can mount it on a headshell or integral tonearm effortlessly using only two screws without the need for nuts.

Features:

  • Dual MC design with independent L/R coils for outstanding channel separation
  • Aligned coils in a reverse V-shape which exerts less pressure on the stylus
  • The cartridge body is pre-threaded for mounting on headshell or integral tonearm
  • Nude Shibata stylus and boron cantilever with exact tracking and high transient response
  • A neodymium magnet and permendur yoke provide dramatically increased magnetic energy
  • Aluminum body lowers unwanted vibration for reduced resonance and better audio
  • Pure Copper by Ohno Continuous Casting process for coils achieve pure signal transfer

- Type: Dual Moving Coil
- Body Material: Aluminum
- Frequency Response: 20-47,000 Hz
- Channel Separation: 27 dB (1 kHz)
- Vert Track: 20°, 1.8-2.2g (2g stnd)
- Recommended Load: Min. 100 ohms
- Impedance: 12 ohms (1kHz) (Coil/DC)
- Coil Inductance: 25mH (1 kHz)
- Output: 0.4mV (@1kHz, 5cm/s)
- Channel Balance: 1.0dB (1 kHz)
- Stylus Shape: Shibata
- Stylus Type: Nude square shank
- Stylus Curvature: 2.7 x 0.26 mil
- Cantilever: 0.28mm diameter nude boron
- Static: 20 x 10-6 cm/dyne
- Dynamic: 16 x 10-6cm/dyne (100 Hz)
- Wire Used for Coil: PCOCC
- Terminal Pins: Brass
- Mount: Half-inch
- Mounting Feature: Threaded body 
- Dimensions (HWD): 17.3 × 16.8 × 25.7mm
- Weight: 7.6 g (0.3 oz)
Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
Audio Technica AT-OC9XSH cartridge
13 November 2021  | 

This cartridge is incredible value for money. The sound quality is fantastic as is the build and finish. Used on an AVID Ingenium P&P turntable and Rega RB880 tonearm.

Was this helpful to you?  Yes  /  No

1 of 1 people found this review helpful.

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket 
Analogue Seduction