Manufacturer
Sumiko Palo Santos Presentation Moving Coil Cartridge
Zoom  Zoom

Sumiko Palo Santos Presentation Moving Coil Cartridge

£4,999.95    
£4,166.63 Exc. VAT |  |

Get up to 25% off a Sumiko cartridge upgrade when you trade in your old one!

Sumiko Palo Santos Presentation Moving Coil Cartridge

For over thirty-five years, SUMIKO has provided a comprehensive range of phono cartridges to music lovers seeking the finest musical experience at a variety of price points. In fact, the great market success of SUMIKO phono cartridges has hinged on their phenomenal cost-to-performance ratio. The Palo Santos Presentation is no exception. New design requirements incorporating advances in material technology and construction techniques have resulted in a significantly improved product which delivers a highly refined and resolved, yet musically satisfying sound quality previously unavailable at or even near its price.

Improvements grace virtually every facet of the product to differentiate it from its smaller sibling the Pearwood Celebration II. Most significant is the new generator anchoring system, which has substantially improved rigidity and reduced resonance and background noise to previously unheard of levels. From the new handcrafted Palo Santos (Brazilian Rosewood) body, which is shorter in height to add vision when mounting and aligning this cartridge, to the Long Grain Boron cantilever and new Line Contact stylus, which significantly improves resolution, the Palo Santos Presentation truly deserves the title as our flagship offering.

TECHNICAL SPECIFICATIONS

Cartridge Type:
Moving Coil

Suspension:
synthetic rubber

Frequency Response:
10Hz - 40khz (+/- 1.5dB)
Output Voltage/Channel:
0.5mV (3.54cm/s @ 1kHz)

Channel Separation:
>30dB @ 1kHz

Channel Balance:
<0.5dB @ 1kHz

Optimum Tracking Force:
2.0g

Tracking Force Range:
1.8g - 2.2g

Dynamic Compliance:
8x10-6 cm/dyn

Internal Impedance:
12Ω

Load Impedance:
100Ω - 1kΩ

Capacitance Range:
100pF - 300pF

Cantilever:
long-grain boron

Stylus:
75 x 4 micron ultra low-mass Line-Contact

Output Terminals:
unique gold-plated tapered brass pins

Cartridge Weight:
8.3g

Mounting System:
standard 0.5” hole spacing (M2.5 threaded)

Supplied Hardware:
2x M2.5 (6mm) stainless steel mounting screws
2x M2.5 (8mm) stainless steel mounting screws
4x M2.5 stainless steel washers,
1x 2.0mm allen wrench

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket 
Analogue Seduction