Shop by Price
Browse Shop
Amazon Audio Amazon 1 Turntable
Zoom  Zoom

Amazon Audio Amazon 1 Turntable

£4,070.83 Exc. VAT |  


Amazon Audio Amazon 1 Turntable


The chassis of the drive is made from a special ICI material to ensure virtually no resonance. This is about a casted material, which has extremely good internal damping features, because of the added extras. We also use 6 LRP elements (Low Resilience Polymer) in our sub-chassis-construction, which decouples the plant level from the base on the one hand, and fights oscillation in the material on the other hand. The LRP elements are arranged in the chassis corners and around the platter bearing.
When you compare these to metal spring constructions, there are no longer obnoxious material resonances of the spring or phenomenon’s of sway. The setting up is uncomplicated and quick, because you only have to care about the horizontal adjustment; no additional adjustment necessary, like for example spring elements etc.


The platter weights 5kg and is made from casted metacrylat. Its characteristics are very similar to the vinyl. During a very complex, temperature optimized process the platter gets drilled to its exact dimensions and afterwards follows the quenching and tempering of the surface. This process prevents stress in the material, which would affect the acoustic qualities. By using the plane platter profile we reach a big matching between vinyl and platter. Furthermore, resonance diffuser in the inner area of the platter eliminates the well-known material resonances in massive plastics platter in the area between 9 kHz and 13 kHz.


The rotation-center of the platter is a ceramic ball in the middle of the inversed bearing. Both, bearing bush and vertical axis are made from multiple hardened steel. Accurate selection and very little tolerance guarantee a perfect, noiseless operation and long lifetime. All moving parts are supplied with a very thin but very good greasing special oil from an oil reservoir at the bearing base. Due to the massive body and the special geometry of the bearing, our platter bearing doesn’t tend to oscillate like most of the other. That is proven by objective measurements we made with the pulse measuring process. Pulses at different areas on the platter are dying out consistent and without excessiveness. An important advantage of inverted bearings is their high fulcrum, which minimizes tilting and commuting.
The drive unit is totally separated from the running gear. A very thin string carries the power from the pulley to the platter. You can switch electronically between 33 rpm and 45 rpm. A LSC-Controller (Linear Speed Controller) monitors all the time the speed and keeps it absolute constant. These from AMAZON developed controller are only used in Amazon turntables. In addition, you can fine-tune each speed separately. Therefore we use padder with a gearbox 1:25.
The heart of the drive is a DC-motor, which is usually used in nautical navigation devices. This motor is stored isolated and swimming in a massive box. The result is an absolute constant speed with perfect running smoothness.

Power supply

The integrated rechargeable battery power supply is unique for analogue drives. In play mode, the rechargeable batteries, as well as the motor, are totally separated from the mains supply. Thereby, all the disturbing influences from the mains supply are kept away and an absolutely smooth running motor is guaranteed. All AMAZON motor units have an intelligent circuit, which monitors all parameters of the NiMH-batteries while charging and discharging. The system recharges the batteries automatically, when it is not in use. One charging cycle is enough to listen to 180 LP’s.


  • Single ended Topology: Class A1 (12TAA7 KT88)
  • Maximum output power :  (No Clipping)
  • 100W RMS at 1KHz, 8 ohms (KT88)
  • 130W RMS at 1kHz , 8 ohms (KT120) optional.
  • Frequency Response:  15Hz to 90KHz
  • Signal to Noise ratio: > 100dB (A-weighted) ref 100W
  • Gain: 23 dB
  • Input Impedance: 100K ohms
  • Input voltage:  110V, 127V, 220V, 240V
  • Dimensions: 30.5cm x 55cm x 60.5cm (W x H x D)
  • Front finishes in Black or natural anodised aluminum

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket