Manufacturer
Shop by Price
Pro-ject Pre Box DS Pre Amplifier
Zoom  Zoom

Pro-ject Pre Box DS Pre Amplifier

  (1 Review)
£279.00   
£232.50 Exc. VAT |  
  

|
Finish:  

Pro-Ject Pre Box DS 

At the heart of the Pre Box DS is a pure single-ended Class-A output stage design, which is a real high-end option for such an affordable pre-amplifier. The highly-shielded metal chassis also effectively rejects any vibration and electromagnetic noise, allowing the internal components to run smoothly and with as little interference as possible. 

When compared to its predecessor, the Pre Box S/E, the DS also offers sonic improvements. Most notable is the reduction of the very low-level hiss, which could appear when the S/E was used with low-level input signals. Thanks to the all-new circuitry, plus relay-controlled volume regulation (with close to perfect linearity and channel accuracy) and input selection, the Pre Box DS now runs clean and smooth - putting the music at the front of the performance, not the electronics. 

The Pre Box DS is supplied with a convenient IR remote for switching inputs and adjusting volume. If you're partnering the Pre Box DS with other Box Design source components, it may be worth considering purchasing the Control-IT system remote. The Pre Box DS is designed to sit perfectly with the Amp Box DS or Amp Box DS Mono power amplifiers to offer a rich, detailed, true Hi-Fi performance.

A 12-volt trigger switch option is also provided so other components connected to the Pre Box DS can be power activated at the same time. 

Features:

  • Improved circuitry with even less noise 
  • Volume control through relays (64 steps, 1 dB) 
  • 4 line level inputs 
  • Input switching relays 
  • 1x Pre-Out, 1x Subwoofer-Out, 1x Record-Out 
  • Extremely low output impedance, for reduced signal-loss with long cables 
  • IR remote control included
  • Trigger switching of power amplifiers 
  • Large, easily-read  control display 
  • Metal casing protects against vibration and interference 

Specifications:

Frequency Response:
20Hz - 20kHz (± 0.2dB)
Noise Floor:
-100dB (IEC - A)
THD:
0.0035%
Gain:
13dB
Pre-Out:
1 Pre-Out, 1 Sub-Out, 1x Rec-Out (RCA)
Output Voltage Typically:
1V @ 1kHz
Line-Level Inputs:
4 Pairs RCA/Phono Sockets
Input Impedance:
10kΩ
Trigger (Trigger Pre):
12V DC Switching Voltage
Trigger Out:
2-Pole, 2.5mm Co-Axial Jack
Outboard PSU:
18V / 500mA DC
Standby Power Usage:
< 1W
Dimensions (W x H x D):
103 x 72 x 103mm
103 x 72 x 150mm (Incl. Sockets)
Weight:
1100g (Without PSU)
  

 

 

 

 

 

Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
Good things in small packages
Saturday, 2 December 2017  | 

This replaced a Monarchy audio 33, which was starting to have problems. The Monarchy is old design but £1200 at the time so not easy shoes for the Pro-ject to fill.No worries. This little beauty more than coped - if anything, the sound was a little clearer, particularly in the lower frequencies. Grumbles? Well the display brightness ranges normal (lowest setting) to retina burning. Thankfully the amp remembers the settings because adjusting them is a pig. Second, the display is in decibels which is totally non-intuitive to anyone other than a sound engineer - I mean what is -40 or -31? Answer medium and very loud respectively through my system but it's all a bit pretentious. Don't let these niggles deter you; this is a fantastic bit of kit. I use it with an Audiolab power amp and they match beautifully. Being an ex-valve man, I was worried that the sound might be too bright but my fears were un-grounded. This site contains some very high end kit and in this context the Pro-ject preamp is a bargain.

Was this helpful to you?  Yes  /  No

1 of 1 people found this review helpful.

Customers who bought this item also bought:

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket