Shop by Price
Trichord Diablo Phono Stage with 'Gen2 Never Connected' PSU
Zoom  Zoom

Trichord Diablo Phono Stage with 'Gen2 Never Connected' PSU

£1,187.49 Exc. VAT |  





Trichord Diablo Phono Stage with Gen2 Never Connected Power Supply 

The Diablo is a high performance, audiophile grade phono amplifier, designed for ultimate transparency and realism. It will maximise the performance of a wide range of phono cartridges from ultra-low output Moving Coils to high output Moving Magnet types. 

The Diablo is user adjustable with a set of four DIP switches on the underside of the unit. These switches allow for adjustment of cartridge loading and gain setting.

The circuitry is signal non-inverting and constructed using high performance, audio grade bipolar and JFET operational amplifiers from Analog Devices and Linear Technology. Metal oxide resistors and ultra low impedance capacitors throughout for lowest possible noise.

The RIAA equalisation network is part passive and part active. The capacitors and resistors used in this stage are very close tolerance audiophile types.

Four 'State of the Art' ultra low impedance, low noise wide-band voltage regulator circuits are employed to power both channels and are largely responsible for the high sonic performance of the Diablo.

The non-ferrous cabinetry is made of aluminium, a design that reduces Eddy current propagation that can affect sound reproduction dramatically.



- Cartridge Loading Resistance: 33 ohms, 100 ohms, 1k ohms, 47k ohms
- Cartridge Loading Capacitance: MC 1.1nF, MM 100pF
- Switch Selectable Gain:
MC - Very Low Output - 0.1 - 0.25mV 74dB
MC - Low Output - 0.25 - 0.4mV 70dB
MC - Normal Output - 0.4 - 0.6mV 63dB
MM - Low Output - 2 - 3mV 52dB
MM - High Output - 3 - 5mV 48dB
- RIAA Reproduction Characteristics: 20Hz - 20KHz, +/- 0.25dB
- Dimensions: 185 x 58 x 112 (mm) (D x H x W) 


The NCPSUs have completely different electronics to any conventional dc power supply. Instead of an oversized toroidal transformer, there is a PCB mounting variety followed by the revolutionary noise reduction circuitry that is called 'Never Connected'.

Although the regulation circuit is physically connected to the incoming mains, it is disconnected electronically. A monitoring circuit detects the portion of the sinewave that is charging the first of a pair of electrolytic capacitors. Once this first capacitor is fully charged, the diode bridge rectifier turns off and a mosfet switching circuit transfers the charge from the first cap to the second. This cycle is repeated continuously.

At no piont in time is the regulation circuitry electrically connected to the incoming rectified mains - hence the term 'Never Connected'. The overall result is a large and measurable reduction in mains borne noise. This dramatic reduction of mains borne noise enables the Diablo phono circuit to give of its very best.





Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket