0 item(s) in basket
Total:£0.00
Currency Convertor:
Pound Sterling Euros US Dollars Japanese Yen Australian Dollars Hong Kong Dollars Swedish Krona

New Rega RP3 £100 OFF!
Payments
Payments
Like Analogue Seduction? Show it on Facebook!
More offers and great deals in our eBay shop!

DNM Stereo Solid Core Speaker cable - New design

more products by DNM

Available
Ref. Code: DNMSCC

£22.99 inc. VAT

No customer reviews yet.*
Average: No customer reviews yet.
(Click here to review this product)

DNM Stereo Solid Core Speaker cable - New design

£22.99 per metre UN-TERMINATED

 

This NEW DNM Stereo Solid Core Speaker cable is more suitable than DNM Stereo Solid Core Precision cable for medium to low sensitivity speakers, high-powered amplifiers or for use in larger rooms.

This latest stereo solid core cable from DNM has a balance of parameters to enable it to work in a wide variety of hi-fi systems. Instead of using 0.65mm diameter conductors the DNM Stereo Solid Core Speaker version uses 1mm diameter high purity copper to reduce the resistance by a factor of 2.5 times. This allows longer cable runs, less sensitive speakers and higher power amplifiers to be used.

 

The ribbon dimensions are set to reduce the capacitance and slightly increase the inductance, to ensure amplifier stability with longer runs of cable. The result is a stereo ribbon 25.5mm wide and 2.2mm thick with the same facility for easy installation as the Precision cable but with a much higher performance in medium to low sensitivity speaker systems. DNM Stereo Solid Core cable is semi-transparent, fully colour coded and only 25.5mm wide x 2.2mm thick. The cable ribbon is designed to easily "unzip" to separate the dual speaker lines and the individual conductors to allow easy fitting of the speaker plugs. The recommended way of using the new DNM Stereo Solid Core Speaker cable is as follows :- The cable directionality can be determined by noting that the print runs in the same direction as the signal. At the amplifier end separate the cable just enough to allow the plugs to be fitted and plugged into the amplifier. Then try to run the ribbon complete without separating it as far as possible towards the speakers to gain the full performance benefit of the fixed spacing of all the conductors. Run the cable along the planned path to the furthest speaker before cutting it to length. Then separate the cable ribbon into the two channels back to the point midway between the speakers to allow connection to the left and right speakers.

 

 


 

Before ordering DNM Stereo Solid Core cable please read these brief notes.

To single-wire a stereo speaker system, order only one length. For example for a 3.0m pair just order 3.0m To place the order, enter the length required (To the nearest metre) to reach the speaker furthest away from the amplifier. The speaker closer to the amplifier is connected by unzipping the cable just enough to separate the ribbon back to a point midway between the speakers. See the datalink sheet below

http://www.dnm.co.uk/datasheets/stereocable_install_and_drawing.pdf

To bi-wire a stereo speaker system. For example for a 3.0m pair just order 6.0m To place the order, enter the length required (To the nearest metre) to reach the speaker furthest away from the amplifier. The speaker closer to the amplifier is connected by unzipping the cable just enough to separate the ribbon back to a point midway between the speakers.. See the datalink sheet below 

http://www.dnm.co.uk/datasheets/stereocable_install_and_drawing.pdf
This product has no reviews added yet.

Listed above are the reviews for this product as written by other customers. If you would like to add your own review, please complete the form below and click 'Submit'. Please note all fields that have a star ( * ) are required.

Related Files

stereocable_install_and_drawing.pdf stereocable_install_and_drawing.pdf

If you would like to tell a friend about this product, please complete the form below and click 'Send'. Please note all fields that have a star ( * ) are required.






SSL