(Details shown apply to the default selection)
At the beginning of 2012, the new Debut Carbon expands on the Debut III in a variety of ways; namely the inclusion of an 8.6" carbon fibre tonearm, 12" platter and rear-mounted junction box. The new motor isolation system also utilises a wholly unique rubber compound developed exclusively by Ortofon A/S to offer dramatically reduced resonance transference from the high-quality 230V motor the turntable employs.
This incarnation of the award winning Debut Carbon comes with an integrated phono stage allowing you to plug it straight in to an amplifier or set of active speakers. The Debut Carbon Phono USB also comes with a USB output so you can record all your vinyl to your computer.The Debut Carbon Phono USB is available in three stylish, high-gloss colours.
8.6" one-piece carbon fibre tonearm, adding stiffness and reducing resonance around the pick-up cartridge (rarely found on budget turntables, due to high production costs).High-quality counterweight - helping further reduce unwanted resonance.Two isolation 'feet' made especially by Ortofon A/S, used to decouple the motor from the plinth.New DC power supply for speed stabilityIntegrated Phono MM preamplifier - No need for a phono stageUSB output to record vinyl to PC or MACFactory-fitted Ortofon 2m Red.3 gloss-coloured finishes available.Lid included
Please Note: This turntable will not work with the Pro-Ject Speed Box. Speed change is operated manually, or electronically via the Speed Box DS Strobo.
Speed: 33,45 RPM (Manual Speed Change) Drive Principle: Belt DrivePlatter: 300mm Metal With Felt MatMain Bearing: Stainless SteelWow & Flutter: +/- 0.10% Speed Drift: +/- 0.80% Signal to Noise: - 68dB Pre-Fitted Cartridge: Ortofon 2M Red Tonearm: 8.6" Carbon FibreEffective Arm Length: 218.5mmEffective Arm Mass: 6.0g Overhang: 18.5mmTracking Force: 10-30mN Included Accessories: RCA Cable, Lid Dimensions (WxHxD): 415 x 118 x 320mm - Lid ClosedWeight: 6kg net
Spent so long researching turntables and finally opted for the debut carbon usb. No phono stage needed which is a definite plus. Very easy to set up and there's plenty of online vids on how to set tonearm. The counterweight is very accurate compared when using a digital stylus force gauge. Cosmetically the turntable looks classy and stylish. Platter upgrade is an option, but will only consider this in the future to enhance an already excellent turntable.
Was this helpful to you? Yes / No
1 of 1 people found this review helpful.
Home > Hi Fi > Turntables > Pro-Ject Turntables