Manufacturer
Shop by Price
Pro-Ject 1 Xpression Carbon Turntable

Pro-Ject 1 Xpression Carbon Turntable

Fitted with the new Ortofon 2M Silver cartridge

£575.00   
£479.17 Exc. VAT |  
  

|
Finish:  

 

Pro-ject 1-Xpression Carbon Turntable (With Ortofon 2M Silver cartridge fitted)

  • Now comes with cork mat

The Pro-Ject 1 was the original turntable designed by Heinz Lichtenegger, founder of Pro-Ject Audio, back in the early 1990s. Since then, the '1' has been made in many forms, most notably of which was the popular Xpression series. Now, in 2013, the latest incarnation has been released - the 1 Xpression Carbon.

The Xpression Carbon advances on from its forbears with some brand new features that have never been seen on any other Pro-Ject turntables before. From the stunning finish to the audiophile technical specification, every element of this turntable has been meticulously designed to offer the best performance for the money - just like the original Pro-Ject 1. 

The Xpression Carbon advances on other turntables thanks to its one-piece carbon fibre tonearm, which is mounted in a brand new heavy-weight assembly, inspired by the superior Evolution tonearms. This over-sized support effectively isolates the tonearm from the plinth, and takes any minor resonances in the tonearm and dissipates them immediately - allowing only the original music signal to be sent to your amplifier. Mounted on the tonearm is the new Ortofon 2M Silver, a special version of Ortofon's world famous 2M Red cartridge, finished with silver spools for optimal signal generation.

The Xpression Carbon benefits from a new AC motor design with DC power supply. It achieves this unique combination by incorporating an AC generator on the underside of the turntable - so the DC power supply signal is changed to a clean AC supply, which allows the 9V motor to perform at its optimal level. The motor is isolated from the main plinth - to avoid resonance transference - by two rubber gromits designed and manufactured by Ortofon's expert rubber division. The motor applies rotating force to a sub-platter, which drives the high-gloss main platter. The Xpression Carbon is supplied with both a felt and a cork mat, to tailor the sound perfectly for your ears, and your  environment.

The Xpression Carbon is  available in three stunning high-gloss finishes; Black, Bordeaux and Midnight Blue.

Key Features:

  • Manual turntable
  • New DC power-supply
  • Low-noise synchronous AC motor
  • Motor isolation blobs designed by Ortofon
  • High-gloss platter
  • Carbon fibre tonearm
  • Evolution-inspired tonearm support
  • Available in three high-gloss finishes
  • Pre-fitted with an Ortofon 2M Silver
  • Gold-plated RCA phono sockets
  • Lid included
Fitted Cartridge: Ortofon 2M Silver
Nominal Speeds: 33 / 45 / 78 RPM (78 Optional)
Speed & Variance:  33: 0.2% 45: 0.18% 
Wow & Flutter:  33: 0.14% 45: 0.13% 
Platter:  300mm 
Main Bearing:  Stainless Steel 
Effective Arm Length:  218.5mm 
Overhang:  22.0mm 
Effective Tonearm Mass:  8.0g 
Tracking Force Range:  0 - 30mn 
Dust Cover: Yes
RCA Phono Sockets: Yes
Tonearm: 9" Carbon Fibre Evolution
Power Supply: 15V AC
Power Consumption:  4.0W 
Dimensions (WxHxD):  415 x 130 x 335mm 
Weight:  5.5kg 

Be the first to Write a Review for this item!

Customers who bought this item also bought:

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket