Manufacturer
Shop by Price
Parasound ZoneMaster 450 Four Channel Power Amplifier
Zoom  Zoom
Parasound ZoneMaster 450 Four Channel Power AmplifierParasound ZoneMaster 450 Four Channel Power AmplifierParasound ZoneMaster 450 Four Channel Power Amplifier

Parasound ZoneMaster 450 Four Channel Power Amplifier

£799.95   
£666.63 Exc. VAT |  
  

|
Finish:  

Parasound ZoneMaster450 Four Channel Power Amplifier

The ZoneMaster450 high-performance amplifier in Parasound’s ZoneMaster™ line combines legendary Parasound Class AB sound quality with the most reliable Class D power modules in the industry, setting a new standard in residential and commercial amplification.

Features:

  • Our ZoneMaster models are very similar in their feature sets, differing mainly in size and number of channels. 
  • Looking for more channels? Try the 1250 or 650. Fewer? 250.
  • Universal amplifier for applications from 50 to 200 watts
  • 4 speaker connections (not enough room for additional Phoenix connectors on ZM450 rear panel)
  • High current for stable operation at 2 Ohms
  • Channel pairs are bridgeable for up to 200 watts @ 4 Ohms
  • Class AB input stage plus premium Class D power stage
  • Independent audio sensing triggers, one for each zone
  • 2 Independent 12 volt trigger inputs, one for each zone
  • Looping 12 volt trigger outputs for each zone
  • Master 12 volt trigger input to turn all zones on-off
  • Speaker level input for expanding systems w/out pre out jacks
  • Bus loop output jacks for passing audio to another amp
  • Mono mode combines L and R for single speaker applications
  • Separate level controls for all four channels
  • Detachable speaker connectors accept up to 12 gauge wire
  • Short circuit and overheat protection with front panel indicators
  • 0.9 watt standby power consumption meets Energy Star & EU specs
  • ZoneMaster 450 Specific Features
  • Compact 1u, 1/2 width chassis size
  • Rack mount kit sold separately
  • Does NOT have A/B outputs (no room on the rear panel for connectors) but is 2 Ohm stable

Power Output
RMS, All Channels Driven (20 Hz - 20 kHz)
 
50 watts x 4 @ 8Ω 
90 watts x 4 @ 4Ω or 2Ω 
160 watts x 2 @ 8Ω (Bridged) 
200 watts x 2 @ 4Ω (Bridged)

Frequency Response 
10 Hz - 60 kHz, +0/-3 dB

Total Harmonic Distortion 
< 0.05% at typical listening levels 
< 1.0% at full power

Interchannel Crosstalk 
70 dB at 20 kHz

Input Sensitivity: 
700mv = Full output (50 Watts @ 8 Ω) 
Total Gain = 29 dB (Level controls set to Maximum)

S/N Ratio 
> 112 dB, input shorted, IHF A-weighted

DC Trigger Requirements 
+9 Vdc to +12 Vdc, 2 mA

Audio Trigger Requirements 
2 mV Audio Signal

AC Power Requirement: 
500 Watts Maximum 
30 Watts Typical 
15 Watts Idle (All Zones on) 
7.5 Watts Idle (One Zone on) 
0.9 Watts Standby 
110-130 VAC 60 Hz or 220-255 VAC 50 Hz 
Note: AC mains voltage is set only by qualified electronics technician.

Dimensions:
Width: 8.5" (220 mm) 
Depth: 10" (254 mm) 
Height, with feet: 2" (51 mm) 
Height, without feet: 1.75" (45 mm), 1U

Weight: 
Net: 4.5 lbs (2.0kg) 
Shipping: 7.5 lbs (3.4kg)

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket