Manufacturer
Shop by Price
Parasound ZoneMaster 250 Two Channel Power Amplifier
Zoom  Zoom
Parasound ZoneMaster 250 Two Channel Power AmplifierParasound ZoneMaster 250 Two Channel Power AmplifierParasound ZoneMaster 250 Two Channel Power Amplifier

Parasound ZoneMaster 250 Two Channel Power Amplifier

£499.00   
£415.83 Exc. VAT |  
  

|
Finish:  

Parasound ZoneMaster250 Two Channel Power Amplifier

The ZoneMaster250 high-performance amplifier in Parasound’s ZoneMaster™ line combines legendary Parasound Class AB sound quality with the most reliable Class D power modules in the industry, setting a new standard in residential and commercial amplification.

Features:

  • Our ZoneMaster models are very similar in their feature sets, differing mainly in size and number of channels. 
  • Looking for more channels? Try the 1250, 650, or 450.
  • Universal amplifier for applications from 50 to 200 watts
  • 4 speaker connections (A and B outputs for both channels)
  • High current for stable operation at 2 Ohms
  • Channel pairs are bridgeable for up to 200 watts @ 4 Ohms
  • Class AB input stage plus premium Class D power stage
  • One Independent audio sensing trigger
  • One Independent 12 volt trigger input
  • Looping 12 volt trigger output for one zone
  • Speaker level input for expanding systems w/out pre out jacks
  • One bus input can be routed to any zone
  • Looping output to connect additional amplifiers
  • Mono mode combines L and R for single speaker applications
  • Separate level controls for both channels
  • Detachable speaker connectors accept up to 12 gauge wire
  • Short circuit and overheat protection with front panel indicators
  • 0.5 watt standby power consumption meets Energy Star & EU specs
  • ZoneMaster 250 Specific Features
  • Compact 1u, 1/2 width chassis size
  • Rack mount kit sold separately (click to view)
  • Full Range Mono RCA Output
  • 80Hz low pass Mono RCA output (for sub)
  • Built in 80Hz low pass filter in bridged mode for driving in-wall/in-ceiling woofers or passive sub(s)

Power Output – RMS, All Channels Driven (20Hz - 20kHz)
50 watts x 2 @ 8Ω
90 watts x 2 @ 4Ω or 2Ω
160 watts x 1 @ 8Ω (Bridged Mode)
200 watts x 1 @ 4Ω (Bridged Mode)

Low Pass Crossover
80Hz, 18dB per octave

Minimum Speaker Impedance
Stereo Mode: 2Ω
Bridge Mode: 4Ω
Note: Operation at these minimum impedances might require additional ventilation.

Frequency Response
10Hz - 60 kHz, +0/-3dB

Total Harmonic Distortion
< 0.05% at typical listening levels
< 0.9% at full power

Interchannel Crosstalk
70dB at 20kHz

Input Sensitivity:
700mv = Full output (50 Watts @ 8Ω)
Total gain = 29dB (Level controls set to Maximum)

S/N Ratio
> 112dB, input shorted, IHF A-weighted

DC Trigger Requirements
+9Vdc to +12Vdc, 5mA

Audio Trigger Requirements
2mV audio signal (5-8 minutes turn off delay)

AC Power Requirement:
250 Watts maximum
15 Watts typical (music playing)
7.5 Watts idle (no music playing)
0.5 Watts in standby
110-130 VAC 60 Hz or 220-255 VAC 50 Hz
Note: AC mains voltage must be set only by a qualified electronics technician.

Dimensions:
Width: 8.5” (220 mm)
Depth: 10” (254 mm)
Depth: 12” (305 mm) with AC cord and cables connected
Height, with feet: 2” (51 mm)
Height, without feet: 1.75” (45 mm), 1U

Weight:
Net: 4.0 lbs. (1.8kg)
Shipping: 7.0 lbs. (3.1 kg)

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket