Manufacturer
Shop by Price
NEW
Goldring E2 Cartridge
Zoom  Zoom

Goldring E2 Cartridge

£79.95   
£66.63 Exc. VAT |  
  

|

Manufacturer:  Goldring

Goldring E2 Cartridge

The Goldring philosophy is to promote the accurate reproduction of the original recording, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. The E Series is designed to capture this experience when used with all medium to high mass tonearms found on the majority of budget to medium priced turntables. This is achieved through the use of our Magnetic Duplex Technology and Goldring Expert Adjustment.

The E2 cartridge, the middle in the range, features the same spherical stylus profile as the E1 but with the additional benefit of an upgraded aluminium cantilever. This is both stiff and light weight allowing the stylus to more accurately trace medium to high frequencies offering more detail and reducing distortion and mis-tracking during loud passages.

 

Magnetic Duplex Technology™

All cartridges in the range feature Magnetic Duplex Technology™-a ‘dual magnet’ generator assembly which more accurately traces the record groove providing better stereo separation and a more involving and musical sound stage.

Expert Adjustment

The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.

Stylus/Cantilever

Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge.

The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

Specifications

  • Model Variations
  • Colour Green
  • Cantilever Aluminium
  • Stylus profile Spherical
  • Stylus radius 0.6 mil
  • Transducer Characteristics
  • Frequency range 20 Hz - 20 kHz
  • Channel balance 1.5 dB at 1 kHz
  • Channel separation >20 dB at 1 kHz
  • Sensitivity 3.5 mV (1 kHz @ 5 cm/sec)
  • Static compliance 20 mm/N
  • Vertical tracking angle 208
  • Electrical Characteristics
  • Load resistance 47 kOhm
  • Load capacitance 100 - 200 pF
  • Internal inductance 400 mH
  • Internal resistance 410 Ohm
  • Mechanical Characteristics
  • Cartridge mass 6.9 g
  • Fixing centres 12.7 mm (0.5 in)
  • Playing weight 1.5 g - 2.5 g (2.0 g recommended)

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket