Shop by Price
Clearaudio Statement Phono Stage
Zoom  Zoom

Clearaudio Statement Phono Stage

£14,995.83 Exc. VAT |  


This sound laboratory in miniature is unique and unmatched in the analogue world.

Clearaudio Statement Phono Stage

The Statement Phono is at home at the absolute top – where the air is thin, but the sound quality reaches its maximum density. From the deepest bass to the highest treble, from the additional bass octave of an imperial grand piano to the piccolo flute of a full church organ and beyond, the Statement Phono presents sounds exactly as they are. It takes nothing away and does not add anything, but embodies the ideal of pure music reproduction.

Silver mica capacitors ensure that the signals are handled without loss. Only the most noise-free resistors and capacitors, carefully selected, are worthy to take their place on the circuit boards of this monumental twelve kilogram phonostage.

This phonostage does not compromise. But it does allow you to connect and control the volume of all major sources via two phono inputs and two additional analogue inputs. For power, an external battery power supply is used, so that interference from the mains electricity grid does not exist.

The Statement Phono embodies the ultimate truth of listening, and with its switchable input resistors and freely adjustable equalisation curves, addresses the needs of discerning analogue fans that want to extract the best sound from their records. This sound laboratory in miniature is unique and unmatched in the analogue world.

Total weight

Preamplifier approx. 12 kg

Power supply approx. 22 kg

Output Voltage

> 12V


Preamplifier + Power supply

17.13 inches
3.94 inches
27.56 inches


Silver aluminium

Power supply Fully symmetrical line and Accu - power supply
Signal to noise ratio 5 mV / 1kHz / +50dB: - 90db
0.5 mV / 1kHz / +70dB: - 80dB
Distortion 5 mV / 1kHz / +50dB: < 0.0035%
0.5 mV / 1kHz / +70dB: < 0.015%
Gain (@ 1 kHz) + 54 dB = MC Mode
+ 34 dB = MM Mode (switchable MPS / Menu Pre Setting)
RIAA ± 0.05 dB / 20 - 100 kHz
Input impedance 8 values, switchable RC (Remote Controler)
5R, 25R, 50R, 100R, 250R, 500R, 1k, 47k
10 kOhm
Output impedance 10 Ohm
Output Voltage > 12V
Power consumption Max. consumption:
Consumption in operation:
Standby mode:
Off mode: 0.0 Watt
Total weight Preamplifier: 12 kg
Power supply: 22 kg
Dimensions (W/D/H in inches) Preamplifier: 17.13 x 3.94 x 13.78
Power supply: 17.13 x 3.94 x 13.78
Dimensions (W/D/H in mm) Preamplifier: 435 x 100 x 350
Power supply: 435 x 100 x 350
Warranty 5 years*
* Only if the Manufacturer's guarantee card is filled out correctly and sent back within 2 weeks to Clearaudio.

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket