Manufacturer
Shop by Price
Clearaudio Balance + Phono Stage
Zoom  Zoom

Clearaudio Balance + Phono Stage

£1,995.00   
£1,662.50 Exc. VAT |  
  

|

With its superior performance, the Balance + phonostage would not be out of place in any professional studio.

Clearaudio Balance + Phono Stage

For maximum dynamic headroom and RIAA accuracy of less than 0.1dB, the components are fitted directly on the circuit board in custom aluminium blocks to minimise electrical and mechanical influences and reliably keep disturbances out of the amp.

A precision tool for sound engineers which performs equally well as part of a domestic high-end system. The elegantly designed Balance + has a headphone output on the front panel and a matching second chassis to house its external power supply.

The addition of the Accu+ battery power supply makes the Balance + a three-chassis phonostage with an even higher performance. Fitted with a high quality volume control the Balance + can also be directly connected to a power amplifier acting as a control preamp. The Balance + phonostage reproduces the entire range of audiophile recordings unaltered.

 

Total weight:

  • Approx. 1.78 kg (Preamplifier)
  • Approx. 2.5 kg (Power supply)

Dimensions:

  • Preamp
    • Width 7.09 inches
    • Depth 8.66 inches
    • Height 2.17 inches
  • Power Supply
    • Width 7.09 inches
    • Depth 7.28 inches
    • Height 2.17 inches

Material/colour:

  • Aluminium
Amplification @ 1 kHz 44 dB (MM mode)
63 dB (MC mode)
Input impedance 47 kOhm / 220 pF / MM mode
510 Ohm / 220 pF / MC mode
MM / MC input switchable (on bottom panel)
RIAA delay time: 75 μs / 318 μs / 3180 μs
RIAA accuracy ± 0.1 dB
Distortion 0.001% (IEC A)
Signal to noise ratio 89 dB (MM Mode)
74 dB (MC Mode)
Channel separation > 92 dB (@ 1 kHz) / opposed channel hot-wired
Max. output voltage 10.5 V (@ 1 kHz)
Subsonic filter 20 Hz: –3 dB / Oct
Power supply ± 18 V DC (external power supply)
Output connections Unbalanced (RCA)
Balanced (XLR)
Power consumption Max. consumption: 6.6 Watt
Consumption in operation: 6.6 Watt
Off mode: 0.0 Watt (turned off at rear panel)
Total weight Approx. 1.8 Kg (Preamplifier)
Approx. 2.5 kg (Power supply)
Dimensions (W/D/H in inches) Preamp: 7.09 x 8.66 x 2.17
Power Supply: 7.09 x 7.28 x 2.17
Dimensions (W/D/H in mm) Preamp: 180 x 220 x 55
Power Supply: 180 x 185 x 55
Warranty 3 years*
* Only if the Manufacturer's guarantee card is filled out correctly and sent back within 2 weeks to Clearaudio.

Be the first to Write a Review for this item!

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket