Shop by Price
Atlas Ascent Balanced Symmetrical XLR Analogue Interconnects

Atlas Ascent Balanced Symmetrical XLR Analogue Interconnects

£470.83 Exc. VAT |  


Atlas Ascent Balanced Symmetrical XLR Analogue Interconnects


 "Build quality is first-rate, such that it's a shame to hide these Ascent cables behind your equipment rack ..."

            -Hi-Fi News, November 2011

The new Atlas Ascent Symmetrical XLR to XLR analogue audio interconnect is the first of our Reference range of products; it employs an OFC screen with copper mylar to give a 100% RFI rejection The signal carrying conductors are our high purity, grain free OCC copper laid in a concentric fashion and contained in a polyethylene foam dielectric. The outer PVC sheath is surrounded in a beautiful grey woven fabric finish.

In the Ascent Atlas does not place barriers from materials of different characteristics such as solder in the signal path; therefore the XLR plugs employed are they're unique Atlas plugs.

The Ascent XLR to XLR analogue audio interconnect uses separate going and return conductors together with a woven screen. The screen with 100% coverage, rejects RFI interference. The two separate conductors dedicated to the going and the return signals are wired separately from the ground conductor. The Atlas XLR plugs employed are a unique design that needs no solder at the conductor to plug interface.


Atlas XLR plugs are wired as follows:

  • Pin 1 = Ground
  • Pin 2 = Hot
  • Pin 3 = Cold

A few amplifier producers wire their systems with different conventions. Always check with the manufacturers instructions before ordering. If you need these wired in a different way, the factory will do that for you. Because the conductor to plug interface is crimped, they may not readily be altered in retrospect.

With the Atlas Ascent balanced interconnect, you can hear more. The construction is designed to reject noise and interference. The grain free OCC conductors with Teflon dielectrics improve signal transfer by reducing harmful deletions; with the Ascent cables, you'll experience the joys of listening to a big band-width signal with excellent VOP(velocity of propagation).

We recommend you do not use these interconnects with another type of speaker cable that's incapable of taking the big band width signal that this interconnect will provide.



Construction :


Conductor Material :


Screen Type/Material :

Braid OFC+AL Mylar

Screen Coverage %:


Dielectric :


Connector :

Solder Free XLR Plug

available lengths

Lengths :


0.5m 1.0m 1.5m 2.0m
also available in custom lengths.


technical data

Capacitance (pF/m) :

97.27 PF/M

Resistance (Ohms/m @20°C): :

0.0288 Ω/M AT 20oC

Inductance (µH/m @1 kHz) :

0.954 uH/M at 1KHz

Velocity of propagation :







Be the first to Write a Review for this item!

Related Products
Atlas Ascent 2.0 Speaker Cable Terminated
01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket