Shop by Price
Arcam FMJ A29 Integrated Amplifier
Zoom  Zoom

Arcam FMJ A29 Integrated Amplifier

  (1 Review)

Not Available for Online Purchase


£707.50 Exc. VAT |  



Arcam FMJ A29 Integrated Amplifier 

Arcam’s A29 integrated amplifier represents another major step forward for Arcam’s stereo audio engineering. We set out to incorporate everything we have learnt in almost 40 years to deliver an amplifier that will set new standards and provide class leading sound quality for the best possible reproduction of your music.

Drawing on the many years of amplifier design experience at Arcam, the A29 uses the best quality components and engineering practice to produce a product that will give many years of musical pleasure and reliable service.

With a class G amplifier, toroidal based power supply, acoustically damped chassis, complementary transistor output stages and exceptionally low levels of distortion and noise the A29 is capable of reproducing music with all its original authority and detail. Rest assured you will be hearing the music just as the artist intended.

The A29 have been designed to leapfrog the competition with a massive 80 watts per channel into 8 ohms and 175 watts into 4 ohms, allowing for huge extra power reserves from our latest generation class G topology that is both clever and efficient.

During normal operation, distortion is measured in less than one part per million so that this massive power is deliver with total control and finesse.

There have been great strides made in improving audio sources and loudspeakers in recent years and the time is right to match them in the field of amplifier design. This ground breaking amplifier is a must audition amplifiers for music lovers who understand that power is nothing without control.

Arcam A29 Key Features:

  • Integrated stereo amplifier
  • 80W Class G amplification
  • On board PSU for rSeries products
  • CR902 system remote control
  • Phono input configurable for line/MM
  • Large ergonomically designed aluminium knob
  • Low power 0.5W standby



Continuous power output (20Hz—20kHz at 0.5% THD), per channel Both channels, 8Ω, 20Hz—20kHz 80W Single channel, 4Ω, at 1kHz 175W

Harmonic distortion, 80% power, 8Ω at 1kHz 0.003% Inputs Phono (MM) cartridge: Input sensitivity at 1kHz 5mV Input impedance 47kΩ + 100pF

Frequency response (ref. RIAA curve) 20Hz - 20kHz ± 1dB Signal/Noise ratio (Awtd) 50W, ref. 5mV input 80dB

Overload margin, ref. 5mV at 1kHz 23dB Inputs:

Nominal sensitivity 1V

Input impedance 10kΩ Maximum input 4.6Vrms Frequency response 20Hz - 20kHz ± 0.2dB

Signal/noise ratio (Awtd) 50W, ref. 1V input 105dB

Preamplifier output Nominal output level 735mV

Output impedance 230Ω Headphone output Maximum output level into 600Ω 5V

Output impedance 1Ω Load range 16Ω - 2kΩ

Accessory power output 2.1mm DC connector 6V, 500mA General Mains voltage 110-120V or 220-240V

Power consumption (maximum) 500W

Dimensions W x D x H (including feet) 433 x 275 x 85mm Weight (net) 9.2kg Weight (packed) 11.1kg Supplied accessories Mains lead CR902 remote control 2 x AAA batteries Accessory power cable E&OE 


NOTE: All specification values are typical unless otherwise stated.

Average Rating (1 Review):  
Write a Review and share your opinions!

Arcam FMJ A29 Integrated Amplifier
Thursday, 4 August 2016  | 

The Arcam A29 is everything i hoped it would be. It was delivered fast and arrived as advertised. Highest recommendation!!!

Was this helpful to you?  Yes  /  No

This review has not been appraised.

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket