Shop by Price
Apollo WT1 SE Dedicated Turntable Wall Support
Zoom  Zoom

Apollo WT1 SE Dedicated Turntable Wall Support

  (1 Review)
£104.16 Exc. VAT |  


Manufacturer:  Apollo Hi-Fi


Apollo WT-1 SE Dedicated Turntable Wall Support

Available in the following finishes


Black frame with 6mm tinted glass,

Black frame with Oak Veneer shelf.

Silver frame with 6mm tinted glass,

Silver frame with Oak Veneer shelf.


Get your turntable properly isolated From Vibration with this..
The Apollo Turntable WT-1 SE wall support is an excellent stylish essential that every turntable owner should invest in

Using a wall mount for your turntable will eliminate unwanted vibrations and significantly improve sound quality. This shelf is essential if you have wooden floors in your house. You will remove virtually all interaction with the floor. Very effective especially with suspended sub-chassis designs.

Its a real looker too..













PLEASE NOTE- Due to the number of variables associated with wall types, wall mounting screws are NOT included. It is the owner’s responsibility to be sure that the installation of this support is completed safely and securely.


Extra Supplied with dampening gel pads to sit between the steel frame and glass
Finish Black or Silver frame
Number of shelves 1
Overall size W x H x D (mm) 525 x 200 x 470
Shelf material 6mm toughened glass or Oak veneer
Useable shelf size W x D (mm) 455 x 380
Weight handling Max recommended 35kg with suitable wall fixings (not supplied)
Average Rating (1 Review):  
Write a Review and share your opinions!

Turntable Wall Support
Sunday, 29 March 2015  | 

I bought this because my wooden floorboards are a bit bouncy and caused all manner of problems with small children dancing near my Sondek... I have installed it and it does exactly what I wanted it to providing bombproof isolation from footfalls close to the turntable.
Although it appears reasonably well put together, there are flaws in the paint finish - if picking up from the shop, I would recommend inspection before driving away. Also, there is no secondary mechanism to level the glass shelf after the support frame has been installed. The shelf sits in the frame on four rubber bungs that cannot be adjusted. A better approach might have adjustable spikes to permit additional leveling to be done. Just be very careful when installing!

Was this helpful to you?  Yes  /  No

8 of 8 people found this review helpful.

Customers who bought this item also bought:

01733 350 878
GBP EURO USD YEN   TOTAL: £0.00    View Basket